Hi all, I have for sale today a fully built and working A600 June Bug Junior in black.
I built this board a while back when I acquired an original from here that had some nasty damage from cap leakage around the ide pins and wouldn't boot from ide.
It's fully built and working fine. I was using it with a furia for whdload but it's now time to let it go. The furia card I was using with this board will be listed separately in a different post.
In the interest of full disclosure I did plan to socket all the custom chips on this board and started with Denise but then decided against this as it would mean expansions couldn't be used. I removed the socket I'd fitted and in my haste I broke two pads (I was quite annoyed) These have been patched with two short wires (see pics).
The jumpers are currently set to make an external drive appear as df0 and the internal as df1 as I was using an external gotek but I can change these back if the buyer wants me to before shipping.
It comes with a dual flash based kickstart containing kickstart 1.3 and 3.2 and you just move the yellow jumper over to switch between them.
I have tested the ide to boot into workbench, I was running 3.2 and using it for whdload, and I have ran several rounds of the memory tester in Amiga Test Kit without issue. The board has been fine since I built it but I haven't used it for a short while and I'm slowly in the process of offloading most of my retro computers and consoles.
I am basically looking to get back what this board owes me so I am looking for £220 plus postage and fees
Payment by PayPal please.
I built this board a while back when I acquired an original from here that had some nasty damage from cap leakage around the ide pins and wouldn't boot from ide.
It's fully built and working fine. I was using it with a furia for whdload but it's now time to let it go. The furia card I was using with this board will be listed separately in a different post.
In the interest of full disclosure I did plan to socket all the custom chips on this board and started with Denise but then decided against this as it would mean expansions couldn't be used. I removed the socket I'd fitted and in my haste I broke two pads (I was quite annoyed) These have been patched with two short wires (see pics).
The jumpers are currently set to make an external drive appear as df0 and the internal as df1 as I was using an external gotek but I can change these back if the buyer wants me to before shipping.
It comes with a dual flash based kickstart containing kickstart 1.3 and 3.2 and you just move the yellow jumper over to switch between them.
I have tested the ide to boot into workbench, I was running 3.2 and using it for whdload, and I have ran several rounds of the memory tester in Amiga Test Kit without issue. The board has been fine since I built it but I haven't used it for a short while and I'm slowly in the process of offloading most of my retro computers and consoles.
I am basically looking to get back what this board owes me so I am looking for £220 plus postage and fees
Payment by PayPal please.
