Hi. I was wondering if the Pistorm would be compatible with 7MHz equivalent clock.
"There are three clocks coming from the Amiga. These are CDAC, C1*, and C3*. The backplane must generate 7M (equivalent to the Processor clock) by the following equation: 7M = C1 * XNOR C3*." (Amiga 500 ... technical reference manual)
C1 and C3 are on the edge connector on all revisions A500 (1000&2000). Equivalent clock might lead or lag actual 7M.
74F86 (not 74F02 as I wrote earlier), or single gate logic SN74LVC1G57
(powered at 3.3 volts and using series output resistor)
"There are three clocks coming from the Amiga. These are CDAC, C1*, and C3*. The backplane must generate 7M (equivalent to the Processor clock) by the following equation: 7M = C1 * XNOR C3*." (Amiga 500 ... technical reference manual)
C1 and C3 are on the edge connector on all revisions A500 (1000&2000). Equivalent clock might lead or lag actual 7M.
74F86 (not 74F02 as I wrote earlier), or single gate logic SN74LVC1G57
(powered at 3.3 volts and using series output resistor)
Last edited:
