Sold Mini tower AT PC cases

[Half-Saint]

A couple of cases I'm currently selling. Will be adding more during the week.

#1 includes power supply and floppy disk drive. Good condition. Not sure, if dirty or weird yellowing. Price: 35€ + shipping SOLD



#2 includes power supply and floppy disk drive. Good condition and no yellowing except one the faceplate. Sold without motherboard and hard drive. Price: 40€ + shipping - SOLD



Edit:

Declaring interest.

Are you still interested in the case? Please contact me via pm.

---=== Added case #3 ===---

#3: 5.25" disk drive not included, has a working power supply - 40€ + shipping - SOLD

 

[stephaneh1369]

Declaring interest. by #2

---

(Interest marked as expired by Half-Saint)

 

[Sebas15041983]

Interested in #1 can you ship to the netherlands?

 

[Sebas15041983]

Declaring interest.

 

[Half-Saint]

Interested in #1 can you ship to the netherlands?

Yes, shipping to Netherlands is 20 euro via courier.

 

[Sebas15041983]

Yes, shipping to Netherlands is 20 euro via courier.

 

[Sebas15041983]

okay, does the casing have any cracks or scratches?

 

[Half-Saint]

okay, does the casing have any cracks or scratches?

No cracks that I can see. There are some abrasions on the top edges (see photos). You can open photos in new tab and see them full size.

 

[maw2k]

Declaring interest.

interested in #2 ... is this a Mhz display or basic Lo/Hi?

 

[Half-Saint]

Declaring interest.

interested in #2 ... is this a Mhz display or basic Lo/Hi?

As far as I know, those displays can be configured any way you want them.

By the way, the cheapest shipping option to Canada is 52€.

 

[kgiannis]

Declaring interest.

interested in #2 ... is this a Mhz display or basic Lo/Hi?

Hello, I just saw the comment and wanted to respond.
A while ago I was looking at how to set the jumper to some of my cases to show the correct value.
I found this site that has a list of various LED displays and how to set them: https://www.minuszerodegrees.net/led_speed_display/led_speed_display.htm

Pretty useful and wanted to share it here Enjoy!

 

[maw2k]

As far as I know, those displays can be configured any way you want them.

By the way, the cheapest shipping option to Canada is 52€.

I actually assume it has a display because of the large dark space. Can you confirm it has? Can you also confirm the front bezel has no cracks? Then we can continue withe sale.

 

[Half-Saint]

I actually assume it has a display because of the large dark space. Can you confirm it has? Can you also confirm the front bezel has no cracks? Then we can continue withe sale.

No cracks in the plastic that I can see. There is a megahertz display but it's not connected to power. I have no idea what that single black wire does. It was like that when I got it.

 

[Half-Saint]

Declaring interest.

Are you still interested in the case? Please contact me via pm.

 

[maw2k]

I have no idea what that single black wire does. It was like that when I got it.

I assume you removed now PSU and everything? Your pic shows it with PSU and all. We could have test if it works by simply turning the box on

 

[Half-Saint]

I assume you removed now PSU and everything? Your pic shows it with PSU and all. We could have test if it works by simply turning the box on

No, I haven't removed the PSU, it's included with the case. There is only that one black wire going to the LED display so it's obvious that it's not powered. Normally there is a pair of red/black wires going to this module that ends in a connector like the one that goes to moterboard pins. I can try to investigate which pins are for power tomorrow.

 

[maw2k]

Thanks, you can keep the PSU since I have different voltage here - except it can be switched to 120 volts

 

[Half-Saint]

Thanks, you can keep the PSU since I have different voltage here - except it can be switched to 120 volts

It's switchable 110/220V

 

[maw2k]

payment sent for tower #2. Thank you

 

[Half-Saint]

Added case #3.