Sold MIST FPGA (less than one month old)

Not open for further replies.


Active member
Rating - 100%
115   0   0
Jun 20, 2015
Guildford, Surrey
I mainly bought this for the Amstrad Core but its a little immature so decided to move this on. The Amiga and C64 cores I've tried work very well.

Comes with a 8GB SD card loaded with an Amiga configuration (WB 3.1+ROM+Games+Apps [Purchased through an amiga store]), C64 Core with games + Amstrad Core with Games. Does not come with WHDLoad licence.

If you are a UK buyer:

Price £175 (postage+Paypal fees inclusive)

If you are a international buyer:

Price £170 (paypal fees inclusive) but shipping costs to be added.

Bought 1st August - so has plenty of warranty and will supply details of store bought from.


Here are the details:

Revised 2k14 version in a high quality metal case, fully assembled, and ready-to-run. The MIST board uses modern hardware to implement classic 16 Bits computers like Amiga AGA, Atari ST(e), and 8 Bits systems like C64, ZX-Spectrum, MSX, Atari XL/VCS, Apple II, Colecovision, Sega Master System, NES, etc. The MIST it's a re-implementation of the original hardware in a FPGA.

List of available Cores for MIST:

Main Components:

  • Altera Cyclone EP3C25 FPGA
  • 32 Megabytes 16 bit wide SDR SDRAM
  • AT91SAM7S56 ARM IO controller
  • MAX3421E USB host controller
  • TUSB2046 USB HUB

External connectors, buttons, and leds:

  • 1 x Analog VGA output with 3*6 bits colour depth
  • 1 x Stereo analog audio jack 3,5mm
  • 1 x SD Card Slot
  • 4 x USB (for keyboards, mouses, joysticks...)
  • 2 x Classic joystick connectors (Atari\'s specification DB9: Amiga, Atari, Amstrad, C64, etc)
  • 3 x LEDs (Power, FPGA and IO Controller)
  • 3 x Pushbuttons (Board Reset, Menu, Core defined)
  • 1 x Micro USB connector for power supply and IO Controller flash update
  • 1 x Power Switch

Internal Connectors, switches and jumpers:

  • 1 Flash Jumper for IO Controller flash update via Micro USB
  • 2 DIP switches (FPGA bypass, core defined)
  • ARM JTAG connector for ARM IO Controller development and debugging
  • FPGA JTAG connector for FPGA development and debugging
  • ARM Debug connector for development
  • FPGA Expansion connector for MIDI/RS232


  • A USB keyboard
  • An SD card (1GB recommended)
  • A VGA screen

Optional Requirements:

  • A USB mouse (for Amiga/Atari/Apple/etc)
  • A classic Atari style joystick
  • A set of PC speakers or an audio cable for connect the audio output of the MIST to a TV/HI-FI
  • A micro USB phone charger for power supply (we only supply a micro USB cable for connect to a computer or to an existing USB charger/HUB)

Package includes:

  • A MIST board (revised 2k14 version) in a high quality metal case, fully assembled.
  • A micro USB cable for power. It may be connected to an USB computer port, or to an USB power supply.
  • No manual included. All MIST information and instructions are available at the MIST Board Project page. Please, check too the Wiki section that contains all necessary documentation for install any core.
Last edited:
Not open for further replies.
Top Bottom