Sold Mtec 68030 & Mtec 68020

  • Thread starter Thread starter milo
  • Start date Start date
  • Replies Replies 22
  • Views Views 3814
Status
Not open for further replies.

milo

Well-known member
AmiBayer
Rating - 100%
206   0   0
Joined
Jun 16, 2011
Posts
1,143
Country
Germany
Region
Niedersachsen
I have here two Accelerator for A500/A2000.
Both Card are with 4Mb and works great. The Mtec 68030 have a 33Mhz Copro and is clocked at 32Mhz.
For the Mtec 68030 i need 180€ and for the Mtec 68020 140€. I accept Paypal as Gift. The shipping cost 11€ in EU and 19€ worldwide.

The Mtec 68030 is sold.
 

Attachments

  • 371.jpg
    371.jpg
    99.7 KB · Views: 6
  • 373.jpg
    373.jpg
    79.5 KB · Views: 6
  • 372.jpg
    372.jpg
    84.3 KB · Views: 4
  • 374.jpg
    374.jpg
    89.5 KB · Views: 5
Last edited:
I have here two Accelerator for A500/A2000.
Both Card are with 4Mb and works great. The Mtec 68030 have a 33Mhz Copro and is clocked at 32Mhz.
For the Mtec 68030 i need 180€ and for the Mtec 68020 140€. I accept Paypal as Gift. The shipping cost 11€ in EU and 19€ worldwide.
Interested in 68030 depends on pictures.

Wysłane z mojego Lenovo K50-t5 przy użyciu Tapatalka
 
Interested in the 030 one


Sent from my iPhone using Tapatalk
 
Can you post pictures of the cards please


Sent from my iPhone using Tapatalk
 
I have here two Accelerator for A500/A2000.
Both Card are with 4Mb and works great. The Mtec 68030 have a 33Mhz Copro and is clocked at 32Mhz.
For the Mtec 68030 i need 180€ and for the Mtec 68020 140€. I accept Paypal as Gift. The shipping cost 11€ in EU and 19€ worldwide.
Interested in 68030 depends on pictures.

Wysłane z mojego Lenovo K50-t5 przy użyciu Tapatalka
Is 68030 clocked 32MHz or 14MHz?

Wysłane z mojego Lenovo K50-t5 przy użyciu Tapatalka
 
missed being first inline by a nose :lol:

just incase Hal does take the 030 interested in the 020 also
 
Last edited:
Is 68030 clocked 32MHz or 14MHz?

I have the same card - CPU is clocked at 14MHz, without possibility to change it, more details about card here: http://amiga.resource.cx/exp/mtec530.

MC68882 can be clocked in sync with CPU at 14Mhz, or async, with oscilator for FPU installed (looks to be installed on this card).

That's the card that has one jumper undocumented - but I've found on some german forums other guys wondering what it does, and tested that it does what they've found :-): moves memory to 32bit area, which may help avoid conflicts with some other expansions if you're lukcy ;-). Memory is unavailable if you boot Amiga with 68000 as CPU (there is a jumper for this).

P.S. In case the owner does not have it and the buyer would be insterested - I can scan and send original german instruction :-).
 
Last edited:
Interest withdraw for 020 got other plans now


Sent from my iPhone using Tapatalk
 
Status
Not open for further replies.
Back
Top Bottom