SOLD
Trying again to sell my SCSI scanner.
Trying again to sell my SCSI scanner.
This color flatbed scanner bundle with ScanExpress 12000SP and ScanQuix 4.1, gives your SCSI equipped Amiga, A4 scanning possibilities, and optionally makes your Amiga a color photo copying machine.
The scanner is almost as good as new. Tested and works 100% perfect. No scratches or marks, though a little UV discoloration on the left side of the scanner. It has been cleaned in- and outside, to make sure all scannings will be clean. ScanQuix floppy's has been tested (full install on my OS3.5/A4000) and works perfectly (see video).
With the bundle you can scan and photo copy (if your have a printer). The ScanQuix disks include programs to scan directly from scanner to printer or disk. Calibration software are included, and in the scanner software, you can correct colors, contrast, brightness etc. Scanning in 24-bit color or 12/8bit grayscale is selectable. Easy to install and setup. I have included some GlowIcons on the floppy, if you like a better iconset in OS3.5+. Remember to setup your SCSI chain correctly (ID is set to 6, but can easily be changed with a small screwdriver).
See a short video with this bundle here: http://youtu.be/yEWaQAbx4lc
THE SCANNER:
Name: Mustek ScanExpress 12000SP
Interface: 25-pin (DB25) SCSI (with loop-though 50-pin (HD DB50) connector)
Scan area: 216x292mm (8.5x11.5 in.)
Resolution: (Optical): 600x1200 dpi (Maximum): 9600x9600 dpi
Scan mode: 36bit (internal), 24bit (external)
Scan method: Single pass
Dimensions: L:470mm W:298mm H:100mm
Voltage: 200-240V AC (Continental European plug - see photo)
Cable: SCSI DB25-pin to HD DB50-pin cable (length: 1,80m)
Hardware manual languages: English, German, Spanish, Italian, French and Dutch
THE AMIGA SOFTWARE:
Name: ScanQuix
Version: 4.1 for Mustek scanners (only)
System requirements: AmigaOS 3.0->, 6MB RAM (but more is better), SCSI controller with external connector, min screen resolution of 640x256 and floppy drive.
Recommended setup: Amiga with 24bit RTG like CyberGraphX, TurboPrint (for better 24bit printing on older OS)
Manuals: Printed manuals in English and German.
ADDITIONAL SOFTWARE:
Some drivers for Windows and MAC are included, and scanner software to handle the scanner and it's images. This is not really useful for Amiga users, but I included it anyways.
Buyer pays for shipment. I accept payment via Paypal or bank transfer. Alternatively you can pick up the scanner here in Copenhagen, Denmark.
Price: 40EUR + shipment (ask for price) and PayPal fees if not gift.
The scanner is almost as good as new. Tested and works 100% perfect. No scratches or marks, though a little UV discoloration on the left side of the scanner. It has been cleaned in- and outside, to make sure all scannings will be clean. ScanQuix floppy's has been tested (full install on my OS3.5/A4000) and works perfectly (see video).
With the bundle you can scan and photo copy (if your have a printer). The ScanQuix disks include programs to scan directly from scanner to printer or disk. Calibration software are included, and in the scanner software, you can correct colors, contrast, brightness etc. Scanning in 24-bit color or 12/8bit grayscale is selectable. Easy to install and setup. I have included some GlowIcons on the floppy, if you like a better iconset in OS3.5+. Remember to setup your SCSI chain correctly (ID is set to 6, but can easily be changed with a small screwdriver).
See a short video with this bundle here: http://youtu.be/yEWaQAbx4lc
THE SCANNER:
Name: Mustek ScanExpress 12000SP
Interface: 25-pin (DB25) SCSI (with loop-though 50-pin (HD DB50) connector)
Scan area: 216x292mm (8.5x11.5 in.)
Resolution: (Optical): 600x1200 dpi (Maximum): 9600x9600 dpi
Scan mode: 36bit (internal), 24bit (external)
Scan method: Single pass
Dimensions: L:470mm W:298mm H:100mm
Voltage: 200-240V AC (Continental European plug - see photo)
Cable: SCSI DB25-pin to HD DB50-pin cable (length: 1,80m)
Hardware manual languages: English, German, Spanish, Italian, French and Dutch
THE AMIGA SOFTWARE:
Name: ScanQuix
Version: 4.1 for Mustek scanners (only)
System requirements: AmigaOS 3.0->, 6MB RAM (but more is better), SCSI controller with external connector, min screen resolution of 640x256 and floppy drive.
Recommended setup: Amiga with 24bit RTG like CyberGraphX, TurboPrint (for better 24bit printing on older OS)
Manuals: Printed manuals in English and German.
ADDITIONAL SOFTWARE:
Some drivers for Windows and MAC are included, and scanner software to handle the scanner and it's images. This is not really useful for Amiga users, but I included it anyways.
Buyer pays for shipment. I accept payment via Paypal or bank transfer. Alternatively you can pick up the scanner here in Copenhagen, Denmark.
Price: 40EUR + shipment (ask for price) and PayPal fees if not gift.
Attachments
Last edited:
