Hello guys,
I'm trying to get an NTSC amiga stuff. Essentially a 1084 monitor and amiga 500 in good shape for a reasonable cost. I'm finding it hard to locate people and places. Anyone here can help with this stuff or at least recommend people or places? Thanks
I've already posted this request for quite a long time here and elsewhere, little to no replies. Mind you this doesn't have to be perfectly exact according the below, but something along the lines of what I'm after.
Early regular Amiga 500 NTSC model circa 1987-1988:
- No yellowing/discoloration, marks and in clean condition.
- Capicators replaced.
- Mouse (no discolration, and smooth to use)
- Whatever basic and essential software is needed to start things up. Clean and tested floppies
- Cleaned, new or strong/lasting floppy drive and/or extra floppy drive
- 8732A Agnus chip and degrader and anything else for smooth and optimal/proper screen/speed during NTSC to PAL conversion
- Good Accelator.
- Optional but helpful to have: 1-3 Amiga new or unused blank amiga floppies packs, Amiga Mouse pad, medium sized disk case box, action replay or cheat software, arcade style microswitch joystick (not the european c64 ones nor atari ones) and gamepad (ex. Amiga hyperpad).
- Optional (New old part motherboard but would rather keep original if in great shape)
Original regular 1084 monitor circa 1987-1988:
-No yellowing/discoloration, marks, screen and line issues and in clean condition
-RGB cable
-Anything done to ensure monitor is not almost dead, prone to failure or has issues.
I'm trying to get an NTSC amiga stuff. Essentially a 1084 monitor and amiga 500 in good shape for a reasonable cost. I'm finding it hard to locate people and places. Anyone here can help with this stuff or at least recommend people or places? Thanks
I've already posted this request for quite a long time here and elsewhere, little to no replies. Mind you this doesn't have to be perfectly exact according the below, but something along the lines of what I'm after.
Early regular Amiga 500 NTSC model circa 1987-1988:
- No yellowing/discoloration, marks and in clean condition.
- Capicators replaced.
- Mouse (no discolration, and smooth to use)
- Whatever basic and essential software is needed to start things up. Clean and tested floppies
- Cleaned, new or strong/lasting floppy drive and/or extra floppy drive
- 8732A Agnus chip and degrader and anything else for smooth and optimal/proper screen/speed during NTSC to PAL conversion
- Good Accelator.
- Optional but helpful to have: 1-3 Amiga new or unused blank amiga floppies packs, Amiga Mouse pad, medium sized disk case box, action replay or cheat software, arcade style microswitch joystick (not the european c64 ones nor atari ones) and gamepad (ex. Amiga hyperpad).
- Optional (New old part motherboard but would rather keep original if in great shape)
Original regular 1084 monitor circa 1987-1988:
-No yellowing/discoloration, marks, screen and line issues and in clean condition
-RGB cable
-Anything done to ensure monitor is not almost dead, prone to failure or has issues.
Last edited:
