Exilent
New member
Oktagon 2000 & 2008
[TABLE="class: basedata"]
[TR]
[TD]Company
BSC / Alfa Data, Germany [/TD]
[TD]Date
1991 / 1993[/TD]
[TD]Amiga
A2000, A3000, A4000
[/TD]
[TD]Interface
Zorro II
[/TD]
[TD]Autoconfig ID
2049 / 5,8
2092 / 5,8
[/TD]
[/TR]
[/TABLE]
Asking 35 euro + postage
Untested!

[TABLE="class: basedata"]
[TR]
[TD]Company
BSC / Alfa Data, Germany [/TD]
[TD]Date
1991 / 1993[/TD]
[TD]Amiga
A2000, A3000, A4000
[/TD]
[TD]Interface
Zorro II
[/TD]
[TD]Autoconfig ID
2049 / 5,8
2092 / 5,8
[/TD]
[/TR]
[/TABLE]
- SCSI 2 controller
- NCR 53C94 @ 25 MHz
- does not use DMA but interrupt driven programmed I/O
- 50 pin internal SCSI connector
- DB25 external SCSI connector for both snap-in and screw-in connectors
- Slow Cable Mode for external devices with long cables
- place for a 3.5" hard disk on the card
- autoboot ROM (oktagon.device) - autobooting requires at least Kickstart 1.3
- ROM versions less than 6.5 may have problems with removable media devices
- the ROM uses a MOVEP operation - which is an illegal instruction on the 68060 - making troubles during bootup on 68060 systems
- RDB compatible
- hard disk activity LED connector
- hard disk controller disable jumper
- A-Max II driver
- supported by Linux
- Oktagon 2008
- sixteen ZIP sockets accept 8 MB 16 bit RAM
- supports either static column or page mode 1M×4 ZIPs
- accepts ZIPs in groups of four giving 2, 4, 6, 8 MB configurations
- memory disable jumper
Asking 35 euro + postage
Untested!

Last edited:
