Closed Original xbox / xboxes

  • Thread starter Thread starter Banjo
  • Start date Start date
  • Replies Replies 6
  • Views Views 1522
Status
Not open for further replies.

Banjo

Member
Rating - 100%
2   0   0
Joined
Mar 23, 2014
Posts
79
Country
UK
Region
London
I have several original xboxes that I bought for spares/repairs a long time ago. I no longer have the time/space for them so am offering them up here if anybody's interested. I've given each a quick test and will describe each as best as possible. Console only, no leads or accessories included.

1) Softmodded by previous owner. Good clean condition with minor marks. Some writing underneath the console in red marker. £8

1.jpg

1_2.jpg

1_3.jpg

2) TSOP flash to X2 5035. Good condition with a few marks, particularly on the lid. Has an issue that it powers on when the power lead is inserted, and the power button doesn't always turn the console off (have to pull the power lead out). Could be broken traces on the motherboard. But functions fine otherwise. Sold elsewhere

2.jpg

2_1.jpg

3) Softmodded with 120GB Maxtor drive. Has a noisy fan which is apparently a common issue on the 1.0 revision. The noise comes and goes. The HDD seems a bit slow at times when running things from it (e.g. emulators), so not sure of it's health. Sold elsewhere

3.jpg

3_1.jpg

4) Normal retail dash (I can softmod if required). As with no. 2, it powers on when the power lead is inserted. Power lead has to be removed to power off. Takes a while to read discs, and sometimes needs them ejected and put back in before it loads (so the laser could be going). Case is slightly worn. Sold elsewhere

4.jpg



5) Normal retail dash (I can softmod if required). Case lid has a large crack going across the top, and some cracks on the front/back of the case. Sold elsewhere


5_1.jpg


5_2.jpg

6) Western Digital 250GB IDE hard drive. Will go great with any of the above consoles, has been fully tested and is error free. £12.

Please note that whilst each has been tested for reading discs, this is no guarantee on how long the laser will last (particularly with no. 4). Also some screws may be missing inside/outside but it won't fall apart in your hands.

Any questions or for pic requests let me know.

Payment by Paypal (gift or + fees), delivery to be added on top depending on service/price required. All advertised elsewhere.
 
Last edited:
interested waiting on pics



All for now until i see pics
 
Last edited:
just a bit of info here..
umber 4 will have 2 broken traces and probably a leaky clock cap, should be easy fix, and should also be tsop modable.
"just adding some info for potential buyers"
same is true for number 2..

i added a few picks how to fix it on this forum some where
 
Last edited:
Pics added. Don't be put off by the marks, I've cleaned up xboxes that were filthy in the past and they come up great with a bit of elbow grease.

Also added info for numbers 4 and 5 that I can softmod these if required. And a 250GB IDE hard drive that will go great with any of these (particularly for emulators etc).
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom