Sold Paravision SX1 for Amiga CD32 Console

Status
Not open for further replies.

Aysel

New member
Rating - 100%
78   0   0
Joined
Apr 24, 2014
Posts
1,259
Country
England
Region
Mansfield
Very clean and origional Paravision SX1 in original packaging which I gave a thorough test today.


Unfortunately I dont know a deal about them but what I do know is:



  • Has 8 meg installed and shows up in workbench as 8 Meg fast 2 meg chip
  • I connected a floppy drive and it boots from floppy disk fine
  • Connected an RGB monitor and signal was nice a clean
  • Plugged by A4000's CF card in and it booted fine to WB
  • Disable/enable switch works great


I connected an AT keyboard to the SX1 and power light dimmed and resets when powered up... its the only suitable keyboard I have so I dont know if its that which is at fault or the keyboard port. I plugged my A4k keyboard into the CD32 and that worked fine.


I created a CF especialy for the SX1 and after formating the partitions it would accasionaly freeze when copying files from floppy to CF. Again, I don't have a second blank CF to figure out whether its the SX1 or my CF / Adaptor.


It is sold with these two issues declared so no returns on that basis please if it turns out to be the SX1.


£139.00 Paypal Gift + Postage

P5230072.jpg P5230073.jpg P5230074.jpg P5230075.jpg P5230076.jpg P5230077.jpg
 

Simon

Well-known member
AmiBayer
Blogger
Rating - 100%
111   0   0
Joined
Dec 11, 2011
Posts
1,291
Country
Belgium
Region
Antwerp
I have on of these and I had one in the past that I bought new when it came out... They both have or had problems. It really needs a heavier PSU with everything connected I think.
 

Timtheloon

retrofanatics.co.uk
Staff member
Staff Moderator
AmiBayer
Blogger
Rating - 100%
212   0   0
Joined
Apr 6, 2015
Posts
4,359
Country
England
Region
Hampshire
aww Missed it Second in Line with interest
 

Reborn

Member
Rating - 100%
31   0   0
Joined
Nov 5, 2011
Posts
238
Country
Poland
Region
Mazowsze
Package received and tested. All works as described! Thanks for nice transaction. Feedback left.
 
Status
Not open for further replies.
Top Bottom