For sale 2 plipbox Pico in purple
Can be used on all parallel Amiga port but NOT on A1000/GBA1000
This plipbox has the Matze 20mhz firmware and a 20mhz onboard crystal instead the original 16mhz one. This gives a little boost in performance …
It needs to be powered with 5v through the usb connector to work. For exemple with a phone charger…
Informations and drivers :
Asking 45€ each plus shipping cost as paypal friend &family
Shipping is 5,5€ to DE
13€ to most EU contries.
On sale also somewhere else…
Can be used on all parallel Amiga port but NOT on A1000/GBA1000
This plipbox has the Matze 20mhz firmware and a 20mhz onboard crystal instead the original 16mhz one. This gives a little boost in performance …
It needs to be powered with 5v through the usb connector to work. For exemple with a phone charger…
Informations and drivers :
plipbox
What is it? plipbox is an Arduino-based device that allows to connect low-end classic Amigas via Ethernet to your local network. It bridges IP traffic received via PLIP on the parallel port of the …
lallafa.de
Asking 45€ each plus shipping cost as paypal friend &family
Shipping is 5,5€ to DE
13€ to most EU contries.
On sale also somewhere else…
