Problem hard disk SCSI

[cocomocho]

Do you have latest firmware flashed on the MKII & SCSI Module? I see the SCSI detect is V2.7. The latest SCSI tools are 3.1 from what I remember.

One of the disks has a firmware update utility on it.

Go here and check you are running latest versions: http://phase5.a1k.org/index.php?driverslibraries

News. I put a SCSI controller and I Oktagon 2008 has detected the hard drive without any problem, however with CyberSCSI MK2 I get that window of information ... I do not understand....

Well I have no idea takes the controller firmware, that as well buy the A4000 will stay 'll check to see if there is any way to find out who takes the SCSI controller firmware.

- - - Updated - - -

From what I see on the HDD Tools version of CyberSCSI is 8.1, but not if that's the version of the controller, because if so, there is a firmware which is 8.6 which was released in 1996.

- - - Updated - - -

I have updated the CyberStorm MK2 to firmware 8.6, had before firmware 8.1 but still leaving the same error window and not to do more with the Oktagon 2008 will cool the hard drive, but with the CyberSCSI not and what more interested in where I work.