Sold Ram68k - 8mb CPU ram module

  • Thread starter Thread starter ProfPlum
  • Start date Start date
  • Replies Replies 10
  • Views Views 1042
Status
Not open for further replies.

ProfPlum

Member
AmiBayer
Rating - 100%
14   0   0
Joined
Jun 23, 2019
Posts
170
Country
Canada
Region
Montreal, Quebec
For sale: A Ram68k module that I purchased here from user Mkl a while back.


I was using this with my A2000 and TF534. I have since upgraded to a TF536 and no longer need this.
In case you are not familiar with this, it plugs into your cpu socket (should be obvious from the picture) and you can insert your cpu on top of it.
I was successfully using it while my TF534 was plugged into the A2000's cpu card slot with a cpu relocator.

Note: You may need to solder a wire from a specific point on your motherboard to one of the autoconfig pins on this board to get the autoconfig chain properly configured.
I had to do this in order to get it working.


I'm asking for $40 CAD + shipping costs - I will provide a quote for various shipping options (tracked, insured, no options) once your address has been provided
and I have checked out the cost at the post office. This item is physically small and light.

Note: Shipping to outside of Canada/US may be a bit pricy (I'm in Montreal, Canada).

Payment can made via Paypal friends.
 

Attachments

  • Amiga_8Mb_Ram.jpg
    Amiga_8Mb_Ram.jpg
    192.1 KB · Views: 5
Possible interest.
Where can I get more info about this board? would it work with an Amiga 1000?

Edit: Ok I found the info I needed, I am definitely interested, PM on the way.
 
Last edited:
Possible interest.
Where can I get more info about this board? would it work with an Amiga 1000?

Edit: Ok I found the info I needed, I am definitely interested, PM on the way.

PM received and initial reply provided. Shipping quote will be provided tonight.
 
Moray,

Shipping to France :
$10.36 untracked, uninsured
$32.05 tracked, insured

Unfortunately, shipping from Canada is expensive. They gouge us extremely. This is in CAD$

Thank you
 
Payment sent!

Money received from Moray. Will send out the package when I step out (in a couple of hrs or so).
Shipping tracking number will be sent out to him in PM later this evening.

Thank-you.
 
Moray,

Here here are some pictures showing the installation in my A2000:

20191219_185912.jpg20191219_185926.jpg



The pink wire was twisted with the yellow wire and wrapped with electrical tape.
The red and black wire is nothing. It's just the drive led connector hanging there.
 
Last edited:
Thanks! After some researching I did find some info, I will try it as soon as I have some time :)
 
Status
Not open for further replies.
Back
Top Bottom