Selling a Re Amiga 1200 Rev 1.5 Mainboard,
Build by John Chucky Hertell,
Works Perfect, I get on my Dell Ultrasharp monitor Without any ScanDoubler nice Picture, See Picture`s
Equiped with S-Video.
Lisa chip is soldered directly to the mainboard so that Indivision Scandoubler can plug it in.
I want what i paid for it ( I paid little more than 460 Excluding shipping etc),
460€+Shipping
Can also sell Without Socketed Chips for 300€+shipping
Price drop 13.1.2021
Without Custom Chips but with Soldered LISA
250+Shipping
Also I`ll take a Vampire V600 V2.2 trade-in /Swap.
for 50€+ I`ll add a 8mb Fastram Expansion Card. Perfect for WHDLoad gaming.
https://amigastore.eu/698-a1208-v2-8mb-fastram-expansion.html#/
There is a Transport damage on the edge under the PSU Connector, but no matter anyway.
Some Spec from Chucky are:-
" It is a reverse job based on the Amiga 1200 Rev 1 D.4 it is more or less a 1:1 replica
CXA Videochip ripped out and replaced with an OPTIONAL AD724, no more delaylines and better quality and composite/svideo.
RF Modulator removed and instead an optional VGA Connector is there (buffered, still 15KHz!)
IRQ7 (NMI) Option
Timingfixes done (as it is about just simply not populating some caps)
pcmcia reset fix (actually not tested yet)
Optional onboard leds for HDD etc.
Supports both Round AND Square DIN for power.
Keyboard signals accessable from PCB.
Floppy SEL signals can be swapped without putting 8520 in socket etc. "
PICTURE`S :
https://photos.app.goo.gl/Cf4vn6nuPmXtWJca8
Build by John Chucky Hertell,
Works Perfect, I get on my Dell Ultrasharp monitor Without any ScanDoubler nice Picture, See Picture`s
Equiped with S-Video.
Lisa chip is soldered directly to the mainboard so that Indivision Scandoubler can plug it in.
I want what i paid for it ( I paid little more than 460 Excluding shipping etc),
460€+Shipping
Can also sell Without Socketed Chips for 300€+shipping
Price drop 13.1.2021
Without Custom Chips but with Soldered LISA
250+Shipping
Also I`ll take a Vampire V600 V2.2 trade-in /Swap.
for 50€+ I`ll add a 8mb Fastram Expansion Card. Perfect for WHDLoad gaming.
https://amigastore.eu/698-a1208-v2-8mb-fastram-expansion.html#/
There is a Transport damage on the edge under the PSU Connector, but no matter anyway.
Some Spec from Chucky are:-
" It is a reverse job based on the Amiga 1200 Rev 1 D.4 it is more or less a 1:1 replica
CXA Videochip ripped out and replaced with an OPTIONAL AD724, no more delaylines and better quality and composite/svideo.
RF Modulator removed and instead an optional VGA Connector is there (buffered, still 15KHz!)
IRQ7 (NMI) Option
Timingfixes done (as it is about just simply not populating some caps)
pcmcia reset fix (actually not tested yet)
Optional onboard leds for HDD etc.
Supports both Round AND Square DIN for power.
Keyboard signals accessable from PCB.
Floppy SEL signals can be swapped without putting 8520 in socket etc. "
PICTURE`S :
https://photos.app.goo.gl/Cf4vn6nuPmXtWJca8
Last edited:
