Sold SDBOX rev3

[kaini]

For sale https://github.com/RetroNynjah/Amiga-Parallel-SD
Supplied with autoboot floppy disk, tested and works fine.
Required external PSU 5v with USB C not included.
Ask 35 EUR ship only EU.
For P&P please ask.

 

[DarkN3m0]

Declaring interest.

---

(Interest withdrawn here)

 

[DarkN3m0]

Interest withdrawn. (was previously declared here)

 

[kaini]

Up

 

[ChrisHammond]

Declaring interest.

---

Declaring Interest. Pending PM

---

(Interest withdrawn here)

 

[ChrisHammond]

Interest withdrawn. (was previously declared here)

---

Sorry, withdrawing interest as you will not ship to UK.

 

[kaini]

Up

 

[AwakeningStar]

Declaring interest.

---

(Interest marked as expired by kaini)

 

[AwakeningStar]

Can we remove and insert the sd card with the SD0 mounted ?

 

[kaini]

Can we remove and insert the sd card with the SD0 mounted ?

Yes.

 

[AwakeningStar]

Yes.

What are the main differences from the firmware version two ?

 

[kaini]

What are the main differences from the firmware version two ?

Revision 3 of this board is using a different connection of the activity LED compared to earlier designs and revisions so rev 3 boards needs a different firmware for the LED to work. Jörgen Bilander has created a suitable firmware for this.

 

[a.mi.goun]

It actualy is not SDBOX V3. It is just redesigned V2.
V3 is completly different, using RPI Pico instead ATMEGA controller.

 

[AwakeningStar]

It actualy is not SDBOX V3. It is just redesigned V2.
V3 is completly different, using RPI Pico instead ATMEGA controller.

Thank you
It’s an SDBox v2 with a different coprocessor chip !!!

 

[AwakeningStar]

Revision 3 of this board is using a different connection of the activity LED compared to earlier designs and revisions so rev 3 boards needs a different firmware for the LED to work. Jörgen Bilander has created a suitable firmware for this.

Understood
This is a new design with a different coprocessor of the know SDBox project
This one have the new firmware V3 that corrects the LED issue that V2 had
Correct ?

 

[kaini]

It actualy is not SDBOX V3. It is just redesigned V2.
V3 is completly different, using RPI Pico instead ATMEGA controller.

V2 and V3 have a ATmega328 not RPI Pico

 

[kaini]

Understood
This is a new design with a different coprocessor of the know SDBox project
This one have the new firmware V3 that corrects the LED issue that V2 had
Correct ?

The V3 have a correct LED issue.

 

[a.mi.goun]

V2 and V3 have a ATmega328 not RPI Pico

Check here, V3 is RPI Pico 2W:

GitHub - jbilander/SDBox-v3: A parallel to Pico 2 W and sd-card project for the Amiga

A parallel to Pico 2 W and sd-card project for the Amiga - jbilander/SDBox-v3

github.com

But it does not matter, V2 with ATmega328 is good anyway.

 

[AwakeningStar]

i can see this build still has the ATmega328

Is the new V3 firmware specific to this build, or can it be applied to all existing SDbox V2?

 

[AwakeningStar]

Check here, V3 is RPI Pico 2W:

GitHub - jbilander/SDBox-v3: A parallel to Pico 2 W and sd-card project for the Amiga

A parallel to Pico 2 W and sd-card project for the Amiga - jbilander/SDBox-v3

github.com

But it does not matter, V2 with ATmega328 is good anyway.

This is the new SDbox V3 with the Raspberry Pi Pico 2 W

Do yo know if this new version with the Raspberry Pi Pico 2 will have the SDbox SD card + Wi-Fi functionality?