For Sale Sidekick64: Cartridge for the C64, C128, C16, plus/4, and VIC20

[chapas]

https://github.com/frntc/Sidekick64

You will require a Raspberry Pi 3A+, 3B+ (NOT included!) for it to work.
Also tested/works with the Raspberry Zero 2 W (not the right case though).
Can also include a new unused RPI 3A+ (+35 Eur).

1 unit available

Asking 35 Eur (unit) + shipping
(trackable/registered shipping included) (Can ship worldwide/non-Europe)


Tracked shipping:
EU – 12 EUR
Non-EU – 20 EUR
(Not shipping to the US due to tariffs?!)


Accepting Revolut, SEPA/IBAN, BTC, or PayPal (buyer adds fees if PayPal protection is wanted)

 

[Watson]

@chapas this thread also requires the proof of ownership updated. The date is incorrect.

 

[mrr19121970]

Hard to tell from the pics, is it ENIG ir HASL edge connector ?

 

[chapas]

@chapas this thread also requires the proof of ownership updated. The date is incorrect.

I thought that a "few days" wouldn't be an issue, my rating is OK, I'm a long time member, but if it's "all non-negotiable" I understand, the rules are to be followed, and I must take new pictures, will do in the weekend when I get time. Until then, you can close or cancel as you see fit.

 

[chapas]

Hard to tell from the pics, is it ENIG ir HASL edge connector ?

HASL with lead

 

[Watson]

I thought that a "few days" wouldn't be an issue, my rating is OK, I'm a long time member, but if it's "all non-negotiable" I understand, the rules are to be followed, and I must take new pictures, will do in the weekend when I get time. Until then, you can close or cancel as you see fit.

@chapas Please contact a member of staff when you have valid proof of ownership and we can reopen the thread/s.

 

[Watson]

Thread reinstated. @chapas please update with the picture you provided in PM

 

[C16Oli]

Declaring interest.

---

(Marked as sold/completed by chapas)

 

[chapas]

Payment received from C16Oli.

 

[chapas]

Shipped, tracking number provided on a PM.

 

[spACEj]

Declaring interest.

---

Declaring interest.

 

[stano2000]

I have bought already SideKick64 from here ago. But I forgott what is DIP switch configuration for the +4. It is different from the default C64 and VC20 settings. Could you send me advice please? I have SDcard for +4 already, showing SideKick264 on the display, but the menu on the +4 TV screen is just empty black screen.

 

[chapas]

I have bought already SideKick64 from here ago. But I forgott what is DIP switch configuration for the +4. It is different from the default C64 and VC20 settings. Could you send me advice please? I have SDcard for +4 already, showing SideKick264 on the display, but the menu on the +4 TV screen is just empty black screen.

Well, this might not the place to request for help, this thread is for the sale, these are my first and only available units for sale so you must gotten them from elsewhere.
I have experience with the C64, I'm not advising for other machines since I could be saying something bad.
Have you checked the link for the github project link at the start of the ad, you should have the jumper config over there.

 

[Negan]

Does it really work on c16 o plus4? The expansion port of the machines c64 vs c264 have completly different pin out.

 

[chapas]

Does it really work on c16 o plus4? The expansion port of the machines c64 vs c264 have completly different pin out.

I'm not going to say it works, since the only real test I've made was on my C64 (version C).

What I can say is what I've read on the projects page:
"Sidekick64 has been tested with various PAL-machines (C64s, C128, C128D), C64 NTSC, C16/+4 (PAL, PAL-N, NTSC), VIC20 (PAL/NTSC), Ultimate64 and C64 Reloaded boards. Sidekick64 connects to the C16/+4 and the VIC20 using simple adapters."

 

[Negan]

I have seen, it is possible to run it on a c264. You need only an adapter for the siedkick64. Very interesting.

 

[chapas]

Payment received from spACEj. Thanks!
.

 

[chapas]

Posted, PM sent with tracking number.

 

[spACEj]

Package received, all good, thank you chapas