Please do NOT declare interest on unavailable cards - these interests will be ignored!!!
Currently available cards:
Currently available cards:
Description of Amiga USB Card | Number Available |
| Freeway Clockport (black PCB) | 10 |
| Freeway Standard/GBA (black PCBs) | 3/2 |
| Freeway PRO | Discontinued |
| Triton Lite: green/purple/black | 3/not available/0 |
| Triton Full: green/blue/black | 0/10/not available |
Hello dear retro fans,
This is official host for Freeway USB cards designed for Commodore Amiga Computers.
we offer whole range of USB controllers
from Clockport solutions - to High-End Zorrolll cards
Basic devices:
FREEWAY Clockport USB Card for A1200, or other Amiga Computers equipped with Clockport:
Info about the card:This is official host for Freeway USB cards designed for Commodore Amiga Computers.
we offer whole range of USB controllers
from Clockport solutions - to High-End Zorrolll cards
Basic devices:
FREEWAY Clockport USB Card for A1200, or other Amiga Computers equipped with Clockport:
Code:
This card connect's to the clockport connector and is addressed by the following addresses:
$d80001, $d84001, $d88001 and %d90001
It has 4 USB ports consisting of two double USB headers (1x cable with 2 USB ports is included)
Built with brand new components from Digikey & Mouser, except USB chip from China
The card has been tested on different Amiga computers like: A500, A1000, A1200+Vampire, CDTV and A2000...
You can add such USB interfaces like network, printer or portable drives to Your Amiga...
[B]Caution![/B] it wasn't possible for us to test all possible combinations, because of leak of hardware, because of that some combinations may not work!
Transfer speed is about 550 - 600kb/s on a regular A500/A2000 with 30 CPU.
You can work with it reasonable, but if you expect the speed of a Deneb or RR - better don't buy it. This USB chip does not get any faster.
The cost for the card includes the license costs for the official and mature Poseidon driver. Keep in mind, Poseidon stack is quite ressource - hungry, it needs at least 020, better 030 CPU!tested and fully working condition, asking 110€ + shipping
Caution! Please read carefully!
Unfortunately Commodore haven't built-in any reverse polarity protection for the CP (it would be very hard to do), after all, you can attatch the cable completely twisted, one pin shifted to the right or left, or the whole row up or down, so it is not idiot proof device and needs Your full attention while You installing it! that's why it's better to check twice before you switch the computer on with Clockport device attached!
Caution! Please read carefully!
Unfortunately Commodore haven't built-in any reverse polarity protection for the CP (it would be very hard to do), after all, you can attatch the cable completely twisted, one pin shifted to the right or left, or the whole row up or down, so it is not idiot proof device and needs Your full attention while You installing it! that's why it's better to check twice before you switch the computer on with Clockport device attached!
Because of that no returns are accepted. Each card will be tested before it is sent out, so we are absolutely sure You'll get a nice working card..
PS
we do accept damaged cards for repair, but sending card back and forth isn't cheap for overseas customers!
FAQ may be found here:
For Sale - USED Freeway USB cards - Official Thread
Interest in 1x Freeway clockport USB Card for A1200. PM.
www.amibay.com
FREEWAY USB Zorroll Card
for A2000, A3000 & A4000 Computers:
Or GBA version of it:
*shows speed with 68030 CPU @50MHz
Tested and in fully working condition. Asking 110€ + shipping
High-End USB cards:
Freeway Triton & Freeway Triton Lite - Zorroll / Zorrolll Cards for A2000, A3000 & A4000computers
Freeway Lite:
Zorro II / Zorro III interfaces with autoselect or jumper (force Z2 mode)
Three USB connectors
Compatible with USB 1.1 and 2.0 specifications
Supports USB 2.0 highspeed mode (480 Mbps)
Supports PIO operation in Zorro II and III modes up to 3.25MB/s or 6.5MB/s
requires at least 68030 @ 25 MHz
Asked price:
Freeway Triton:
Our High-End USB card
Zorro II / Zorro III interfaces with autoselect or jumper (force Z2 mode)
Three USB connectors
Compatible with USB 1.1 and 2.0 specifications
Supports USB 2.0 highspeed mode (480 Mbps)
Supports PIO operation in Zorro II and III modes up to 3.25MB/s or 6.5MB/s
128 Mbit FlashROM (14 MB for USB stack, 2 MB for Rescue Image (installation software)
The firmware can be updated via the JTAG interface
USB/Flash can be switched off by jumper
ROM autostart can be switched off by jumper (ROMOFF jumper)
requires at least 68030 @ 25 MHz
Asked Price:
few words about used USB Stack:
All Freeway Cards have official Trident Poseidon licence and are using it as a USB Stack,
this means all supported devices in Poseidon are also working with Freeway cards..
Fair Warning!
Some Freeway cards may not work in early A2000 rev. 4.x if BUS fixes recommended by Commodore wasn't applied!
BUSTER rev.3 or BLUSTER is recommended!
deactivate / remove FlashROM may help to solve this situation!
support ANY Busboards is not provided! These cards are built for official Commodore Amiga, not homebrew Amiga-like models,
Shipping isn't included, and need to be paid additionally!
Best regards,
- 8 Bit Dreams -
Last edited:
