Closed Win95/98 or DOS pentium motherboard/CPU

  • Thread starter Thread starter keitha
  • Start date Start date
  • Replies Replies 1
  • Views Views 795
Status
Not open for further replies.

keitha

Member
AmiBayer
Rating - 100%
68   0   0
Joined
Feb 7, 2012
Posts
533
Country
Scotland
Region
West Lothian
SOLD ELSEWHERE


Hi

it's amazing the stuff you find, when looking for something else :ninja:

I have for sale an old Cyrix CPU and Pentium motherboard. It's an idea DOS or Win95/98 machine, for playing retro PC games and software.

Cyrix (IBM) 686-P120 (100mhz) Socket 7 CPU
An unbranded (Intel chip-set) Socket 7 motherboard (P75 - P200 mmx):
3x 16 bit ISA slots;
4x PCI slots
4x 72 pin slots (60 and 70 simms) and
2x sdram/dimm slots (one 128mb 133mhz fitted)
AT power, Floppy connector and two 40 pin IDE.
IDE and floppy disk leads (5/1 disk-drive slots)

Jumper settings are printed on the board


The 9 pin D socket cable is missing, also I'm unable to test the board (no AT supply) however the board was working on removal from case (few years ago).

Also included:

ISA VGA 16Bit OAK Technology Video card;
AGP Nivida 3 Ti200 video card (64m + TV) I never tried the TV bit :o
128mb sdram/Dimm (either 100 or 133)
PCI Ethernet card (no idea on make)
1.44 Floppy disk drive (untested)
Mixed/loose 30 pin simms/72 pin simms (9 or 10)
DOS 5.1
Windows 3.1

I might also have a 16 bit ISA 56k (genuine rockwell chip-set) modem (If I can find it). Can also throw in a CD-Rom drive if needed.

DSCF1568.jpg

DSCF1575.jpg

DSCF1572.jpg

DSCF1571.jpg

DSCF1569.jpg

DSCF1574.jpg


£25 ono, £8 p+p

PS there's a heat sink and fan (I removed it for taking picture's)
 
Last edited:
Lower price: £14 + £8 p+p (will combine with win95 3.5", as need to clear)

Thanks

PS: could possible do postage cheaper by removing cards (about £5)
 
Status
Not open for further replies.
Back
Top Bottom