I will be making a small batch of these next week for anyone interested.
Works with full size or home brew (micro sd) Zulu SCSI pcb’s. (Just remove the snap out section on the back to allow full size SDHC Card)
Made from galvanised steel with pcb spacers pressed in. Will come with 4xm3 screws to attach your card. If you wish to fit a homebrew Zulu SCSI pcb’s please say and a spacer will be supplied for the back of the pcb as the homebrew version has no mounting screws on the rear
Tested with Zulu SCSI RP2040, Zulu SCSI Hombrew, Zulu SCSI Wide, Zulu SCSI Blaster, SCSI2SD V6, other versions may fit but have not been tested.
Price is £25 each plus shipping.
UK Shipping for one £5
USA customers please note Royal Mail is now collecting duties & taxes due to a new agreement with your great orange one.
For instance if the value is £5, taxes, duty and fees are collected when booking shipping, the cost is £1 on £5 value item.
This is the final revised version that shipped, I will update the thread with some better pictures. Basically the pcb was moved across for wider compatibility.
Works with full size or home brew (micro sd) Zulu SCSI pcb’s. (Just remove the snap out section on the back to allow full size SDHC Card)
Made from galvanised steel with pcb spacers pressed in. Will come with 4xm3 screws to attach your card. If you wish to fit a homebrew Zulu SCSI pcb’s please say and a spacer will be supplied for the back of the pcb as the homebrew version has no mounting screws on the rear
Tested with Zulu SCSI RP2040, Zulu SCSI Hombrew, Zulu SCSI Wide, Zulu SCSI Blaster, SCSI2SD V6, other versions may fit but have not been tested.
Price is £25 each plus shipping.
UK Shipping for one £5
USA customers please note Royal Mail is now collecting duties & taxes due to a new agreement with your great orange one.
For instance if the value is £5, taxes, duty and fees are collected when booking shipping, the cost is £1 on £5 value item.
| Buyer | Qty | Buyer Status | Seller Status | Notes |
| @kavanoz | 5 | Paid | Shipped | |
| @simond | 1 | Paid | Shipped | |
| @tihopop | 1 | Paid | Shipped | |
| @neocdtv | 1 | Paid | Shipped | |
| @wmaciv | 1 | Paid | Shipped | |
| @qz3fwd | 4 | Paid | Shipped | |
| @Sotos | 1 | Paid | Shipped | |
| @Hannibal | 1 | Paid | Shipped | |
| @Telsar | 2 | Paid | Shipped | |
| @Duri | 1 | Paid | Shipped | |
| @Silverman71 | 1 | Paid | Shipped | |
| @Radocaj | 1 | Paid | Shipped | |
| @jbrianc | 3 | Paid | Shipped | |
| @C16Oli | 1 | Paid | Shipped | |
| @dlundqvist | 1 | Paid | Shipped | |
| @Br0ther | 1 | Paid | Shipped | |
| @AmigaAmigo | 1 | Paid | Shipped |
This is the final revised version that shipped, I will update the thread with some better pictures. Basically the pcb was moved across for wider compatibility.
Last edited:
