Recent content by caiusfabricius

Hi, I'm looking for working '391079-01' and '391078-01' PLCC44 chips for my faulty Amiga 600 (June Bug Rev 1.5) at reasonable price.Thanks.

DM sent.

Attached is the whole KiCad project converted from Eagle (files are in the 'TapuinoNext-Mini' sub-folder)

In my previous post I shared the GERBER files for PCB fabrication.Do you need also the whole project? As for SD card connection your SD to MicroSD adapter has 7 pins (picture attached) while the TapuinoNext-Mini PCB has 5 pins header, that's was my doubt.

A question.The TapuinoNext-Mini board has a 5 pins header for SD socket whie the SD adapter has 7 pins.How to handle this?

Thanks for reply.I took the chance to convert the Eagle project to KiCad, I added a GROUND power plane and exchanged the two pins 'SDA' and SCL' as most of I2C display have this pinout.All the rest of the original design is untouched.I attach the GERBERs to send to your prefereite PCB...

Hi all! I have the first revsion of Tapuino and it works great, the one you can see here : https://github.com/sweetlilmre/tapuino/wiki I wonder which is the latest firmware suitable for this hardware revision.Besides, was the counter feature ever added?

Hi all, my Philips CM8833-II monitor, which served me faithfully for many years, suddenly some time ago shut down so I put it aside.In these days I'm trying to repair it.I replaced the flyback transformer, the horizontal and vertical deflection transistor with no luck then I swapped the...

I think working with Arduino NANO hardware is pretty limiting, maybe we should move to something more expandable and flexible.

Maybe I found a little bug with some .TAP where counter stops to working but file is successfully loaded and game starts (The last Ninja II is an example). I'm also wondering if something can be done in the future with multigames .TAP.I think we could study the source of VICE emulator and see...

I tried an headphone and volume is much better.

From the pictures on your assembly guide it seems I have the same buzzer of yours Yes, confirmed, PCB 1.71 R2 is 100% working

Another issue I had was that the I2C board was soldered to the LCD module in a way that they touch each other causing malfunctioning of the LCD itself No, I think we must concentrate on multigames TAP, I have some ideas but lack of skills to put them into practice P.S. It Tapuino compatible...

Here is my realization, a bit anonymous but fullly working All my issues sorted soldering wires directly to headers without using any connector (as I said dupont wires are not really reliable) I noticed that on some .TAP, though the game has successfully loaded, the counter is stuck at 99%...

Damned chinese dupont wires!All working now, thanks! :thumbsup: