Recent content by dalek

Get some mylar or mica sheets from an electronics supplier (or aliexpress) or cardboard and trace it out.

That's all a good start. At 50MHz the Rev6 will be quite comfortable and should do 100MHz when everything else is stable. Also do you have any idea what BFG firmware version it is? It's still worth measuring 5V and cleaning PSU plug and mobo socket. That really makes no sense. If you can...

Sounds like power issues - check what the BFG receives on it's 5V input on the card itself - it should be minimum 4.95V. Ideally a bit higher. Cleaning PSU connector can help, recapping PSU and depending on the model you can change resistors to boost the 5V rail a bit.... You can also measure...

I can send “bona fide gifts” from China via Australia for cheap.... just hit me up 🤣

I read it as he is after these: https://www.thingiverse.com/thing:4032299

This sounds like an oxidised power connector on the board or at the plug more than anything. You shouldn't get that big a drop. I would get some contact cleaner and some q-tips and go over the PSU plug and squirt some in the socket as well - then mate them a few times to try and freshen it up...

Glad to see original keys united with a system :) I am in the same boat (missing A4000D keys) and my understanding was that the key needed to be HH121, yet these are coded A236... I wonder are they the same thing, or were there different lock/key combos for different systems or different...

The site owner jPV responded to me and says they have moved the site to a new https enabled web host that you can try here: https://jpv.amigaaa.com/NetworkBootDisk/

Received - all good - feedback left. Many thanks :)

That's strange - must be some sort of geographical DNS issue with that host. In any case you can access it from the wayback machine: https://web.archive.org/web/20250105114447/http://jpv.wmhost.com/NetworkBootDisk/ Let me know if you still have issues I've saved a local copy of the page...

Have you got any further with the link? It works for me...

As bdb says Roadshow is great and the full version is what I use too. Definitely try the demo. But still Miami DX should work with the A2065 - try and work out if it is a physical problem Miami problem or a DHCP problem by trying to set a fixed IP address as bdb says. See if you can ping your...

Looks good - should work well. Give it a go and let us know!

Defaults will be fine: 1. SQE test - shouldn't be needed but won't hurt if enabled 2. LinkAlert - no idea - seems like some monitoring feature of that particular transceiver - again shouldn't hurt either way 3. Polarity Correction - should only matter if you made your own cable or are trying to...

Declaring interest. I also have some spare CPU side KEL connectors for A3000 / A4000 CPU cards ( max 2 per customer ) €16 / $17 Declaring interest in 2 KEL connectors EDIT: PM and payment sent