Recent content by p_a_green29

supaduper All the PMs I have from you are blank. Can you try again? I have the card but need to look at what you sent

Sending PM. Interested in A4000 recap and Zorro slot fix

Interested in one without Cpu

Hi, I am interested in 2 assembled KTRL CD32+ pads, shipped to UK. Could you send me a PM Thanks,

All, I have a working monitor, just need the plastic stand Let me know a posted price (I am UK based) Thanks,

Arrived and working. Thanks!

Interested in : 1xNum 8 (mini 23 pin adaptor, grey plastic + buffer) 1x3 (23 pin adaptor inc csync switch) Posted to UK

Interested in 2 sets shipped to UK - could you PM details of where to send payment. Thanks!

After a socket as above. I need it to try to straighten out the pins on some second hand 68030MC50s I have before I try them in my GVP acclerator Used is fine, even damaged underneath as long as the CPU socket is undamaged. PM me with a price

Interested in the Indivision

Slightly yellowed, Kickstart 1.3, and 0.5mb trapdoor expansion. With a tank mouse, A600 PSU, A520 and a Joystick. All works fine UK only for now. After £30 including postage

I flashed one of these fine today. Did it with a £2.40 USB stick from Ebay and soldered the wires directly I had to the board then melted them off. Thought I would try and cheat and use a floppy connector to do the power, but it refused to flash. Soon as I wired up all 5 lines to the device...

Its been sitting in a box for a couple of years ago, so its time it goes. Comes with A600 PSU, Mouse, Joystick, and RF Modulator. It has a trapdoor expansion so has 1MB memory After £15. I think postage will be around that mark as well (approx £30 total), so I will post to the UK only.

All, After spending an evening getting my Mediator working (I think I now have graphics, sound and ethernet) the most worrying thing is I dont seem to be able to get the PPC side of the Cyberstorm showing on anything. Thanks to whoever said about removing pci.library when things stop booting...

It will boot - just not with a startup. I had older versions of the libraries on there (I assume older) but no joy. After hacking out sections of the startup sequence I now get to a point where I am getting "block reuse errors" or similar and a WB with no icons.