For Sale A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

  • Thread starter Thread starter mkl
  • Start date Start date
  • Replies Replies 914
  • Views Views 238211
@mkl

Would you have any PCB's left?

I would like to buy a couple from you if I may =)

Other than the XC9572 what are the other BOM components?
 
mkl said:
noradtux said:
Hi, I am interested in purchasing an ide68k. Is there one available?

Kind regards
Malte
Click to expand...

Hi all. None that can ship right away. What I have is a few untested v297 and one v401, and a few V402 half completed, and v402 blank pcbs.

---------- Post added at 21:36 ---------- Previous post was at 21:23 ----------

britlord said:
iT'S V402 and the cpld chip is D121729A as for the Impact software that I'm using. It's 8.1, cos 4.2 don't see the cable on LP1
(Win XP and a old win 98se laptop)

Mike..
Click to expand...

The code is 7C, 15I or similar, meaning speed number (pin to pin delay in nanoseconds?), and Commercial, Industrial temperature ranges.

I would download the 8.1 software but been too lazy to register at xilinx download site.
If you could find the v3.3 software, you could then try if the file format is different somehow,
or if Impact software is operated diffrently. In that old v3.3 GUI I would first run "initialize chain", then xc9572 symbol appears if jtag connections are ok, then click it and select the jed file for the chip, run "program" with erase and verify options, and also run read back the 4 character user code to see if the right verision is on the chip, such as user code "4025".
Click to expand...


It's 7c

Mike..
 
Am I OK to pay 65€ for the ide and CF adaptor posted, for when some are ready to ship or should I wait ? :cool:
 
A500DaBest said:
britlord said:
Hi. I mean like this one..
Click to expand...


I am interested in the IDE kit for the A500. Do you have it still for sale?
Click to expand...

I have MKL's ide (without the CF connecter), as I have fitted my CF ide adapter under the floppy drive, and made a slot for the CF card. That way I can easily remove the CF card without taking my Amiga apart.

Mike..
 
Hi. I've buyed 10 more cplds for v402 boards, so maybe a few will be for sale. And the blank pcbs for sale (these have tin solder traces on cpld pads, but are cleaned). A few v297 assembled
The WWW page hasn't been updated for a while. V402 cpld code was posted on this thread earlier. V29x variant of this cpld code is untested. V40x (and 10x) vs. others: separate 8-bit 74..245 buffer. Clockport. => careful consideration needed for ior,iow,and buffer enable signals needed to get them working with unified cpld source.
 
Hi. "stock" is 2 v402 and 4 v297 boards.
Please send PM. (Also to "refresh" earlier interest, i may have forgotten it.)

Prices
V402 45€
V297 70€ (included 3 wire cable with header receptable, for /ovr /int2 /int6 connections)

Shipping registered (signed-for) 10€, includes 40-pin ide cable
or non-tracked shipping of V402 without cable: free 0€
 
Last edited:
photos are kind of out of focus, I think they need to be retaken.

V297 pics and
ide 2 cf adapter for v40x boards
 

Attachments

  • Valokuva0012.jpg
    Valokuva0012.jpg
    193.2 KB · Views: 3
  • Valokuva0013.jpg
    Valokuva0013.jpg
    103.3 KB · Views: 5
  • Valokuva0014.jpg
    Valokuva0014.jpg
    85.9 KB · Views: 5
  • Valokuva0015.jpg
    Valokuva0015.jpg
    108 KB · Views: 4
  • Valokuva0033.jpg
    Valokuva0033.jpg
    108.7 KB · Views: 5
  • Valokuva0034.jpg
    Valokuva0034.jpg
    112.8 KB · Views: 6
  • Valokuva0036.jpg
    Valokuva0036.jpg
    101.4 KB · Views: 6
Last edited:
mkl said:
Hi. "stock" is 2 v402 and 4 v297 boards.
Please send PM. (Also to "refresh" earlier interest, i may have forgotten it.)

Prices
V402 45€
V297 70€ (included 3 wire cable with header receptable, for /ovr /int2 /int6 connections)

Shipping registered (signed-for) 10€, includes 40-pin ide cable
or non-tracked shipping of V402 without cable: free 0€
Click to expand...

Declaring an interest in a v402 if there are any left.
 
Hi. I have two v402 packed for shipping - but I'm not sure if I'll be able to ship very soon. Maybe by next week.
 
I tried V402 with the cf adapter in A500 and I think they will fit under the keyboard. Maybe add plastic sheet for insulator to be sure not contact with the metal shell of keyboard. But he top metal shield of mainboard needs to be left out I think.
 
interest in 1 or 2 blank pcb pending available

payment sent
 
Last edited:
You must log in or register to reply here.

Similar threads

R
For Sale Amiga USB PS/2 Mouse Adapter - for all Commodore Amiga models (incl. A600)
Replies
10
Views
283
Roman
R
Back
Top Bottom