Probe
Member
PRICE DROP!!!!
In pristine condition and working. Got to much stuff laying around so this one has to go. Asking €130,- excluding shipping.
Postage for EU around €15,-, world around €25,-, that includes Track&Trace and Insurance.
From the webpage, http://www.1541ultimate.net/content/index.php?option=com_content&view=article&id=42&Itemid=20
Specifications
Specification 1541U-II
1541 Ultimate-II
Features:
* Tape emulator cable is an accessory, which is needed to work with tap files.
Specifications:
- Board size: 62 x 84 mm
- Sturdy plastic case, enforced with glass fiber
- 700k-gate FPGA
- Full size 6-pin DIN connector (IEC)
- 2 MB Flash ROM
- 32 MB SDRAM
- MicroSD card compatible slot
- USB host port (supports Mass storage class only)
- Stereo audio output
- 6-pin expansion pin-header for connection to tape port (for C2N emulation), or other future features.
In pristine condition and working. Got to much stuff laying around so this one has to go. Asking €130,- excluding shipping.
Postage for EU around €15,-, world around €25,-, that includes Track&Trace and Insurance.
From the webpage, http://www.1541ultimate.net/content/index.php?option=com_content&view=article&id=42&Itemid=20
Specifications
Specification 1541U-II
1541 Ultimate-II
Features:
- Full, cycle accurate emulation of two real Commodore 1541 diskdrives.
- Uses .D64 and .G64 files stored on MicroSD card or USB stick
- Supports .G64 files as well (Read/Write)
- Configurable IDs
- Configurable ROM (1541/1541C/1541II or custom)
- RAMBOard memory expansion (up to 40K)
- MicroSD or USB storage device (stick, card reader, and even HD)
- FAT/FAT32 support, with sub-directories and long filenames
- ISO9660 support with Joliet, for reading .ISO files and access external CD/DVD drives through USB
- Supports SD V1.1 cards as well as SD V2.0 in High Capacity mode (SDHC)
- Battery backed up Real Time Clock
- Command Interface module with UltimateDOS
- Accessible module through I/O space that allows direct commands to Ultimate-II
- Ultimate-DOS, I/O space driven direct file access to SD/USB
- Dual SID implementation, optionally 8 voices each
- Ultimate Audio module
- Up to 7 voices of sampled audio simultaneously
- Accessible through I/O space
- 8- or 16-bit samples
- up to 48 kHz sample rate
- Built-in SID player; plays SID files on either 'real' SID or emulated SID.
- C64 cartridge emulation:
- Final Cartridge III
- Action Replay
- Retro Replay
- Super Snapshot
- Turbo Assembler w/ Codenet
- Epyx Fastloader
- Custom 8K/16K carts
- Custom Ocean / System3 carts (up to 512K)
- Commodore 1750/1764 REU
- REU Compatible
- Size selectable from 128K up to 16 MB
- Can be combined with Retro Replay and SuperSnapshot compatible roms
- Flexible freezer menu
- select, mount, create D64 images, browse disk images
- create new directories, delete files
- Ultra fast DMA load of single file programs (.PRG files on SD/USB, inside .D64 or .T64)
- Configuration screen, with resident settings
- Tape emulation, through 6-pin header on the bottom of the board*
- Load .TAP files to C64
- Capture tape data from C64 to .TAP file
- Capture tape data from a datasette and store it as .TAP file
- Write .TAP files back to tape, using a Commodore tape deck
- Totally rewritten firmware, for easier expansion and maintenance
* Tape emulator cable is an accessory, which is needed to work with tap files.
Specifications:
- Board size: 62 x 84 mm
- Sturdy plastic case, enforced with glass fiber
- 700k-gate FPGA
- Full size 6-pin DIN connector (IEC)
- 2 MB Flash ROM
- 32 MB SDRAM
- MicroSD card compatible slot
- USB host port (supports Mass storage class only)
- Stereo audio output
- 6-pin expansion pin-header for connection to tape port (for C2N emulation), or other future features.
Last edited:
