Closed 2x Universal "FlickerFixer" GBS-8220

[hgw]

I have for sale two GBS-8220 Flickerfixer. It works well on every Amiga with LCD or CRT Monitor (the reason why I sell than is I ordered to much ) The Flickerfixer was only used once to test it. That means it is nearly brand new It cames with a cable to connect them with a SubD23 connector. If it is necessary I can provide the method how to connect them with the Amiga.

looking for 23 € for one flickerfixer

no shipping cost but only Germany and the EU

here the connection layout from subD23 to VGA input and the included Videocable

DSUB23: 3=red 4=green 5=blue 10=Hsync 12=Vsync mass=16
FLIFI-VGA: 1=red 2=green 3=blue 13=Hsync 14=Vsync mass =6,7,8

DSUB23 to FLIFI-VIDEO-CABLE to DSUB23: red=3 green=4 blue=5 grey=10 yellow=12 black=15+16

Georg

PS: if you need some images I can send them but you can find a lot with Google

 

[vibros]

Hello,

if possible, i wish to see this device in action with an Amiga, on low and hi-laced PAL (or NTSC) resolution, through a VGA monitor.

Thank in advance.

Regards
Stefano

 

[finnr]

I am interested. Would also like to screen it in action.

EDIT:
This is the same as the 8200, but with 2 RGB out. And i already know that one. Memory is getting slow
Interest withdrawn, sorry.

 

[amigo-mexicano]

Interested, will send PM.

 

[hgw]

About the question to see the GBS-8220 in action there are some videos on youtube. Search for "Amiga 3000 on GBS-8220" and you will found some good examples how it looks like

Georg

 

[amigo-mexicano]

Interest withdrawn.

 

[voyager_1701e]

Hi Georg, can you clarify, you are selling both units for total 25EURO + shipping?

 

[hgw]

Thank you for the hint! I corrected it

 

[Epongette]

Hi, declaring interest in 1 unit
Do I need to solder anything or they are ready to use ?

 

[hgw]

You need to build a connection cable between your subD23 VideoOut and the Video-in of the Flickerfixer. There are a included cable that needs to be connected with a DSub23 connector on the Amiga side. That means you have to solder a little

I updated the first post with the connection layout....