For Sale 4 bank x 512KB programmable Kickstart memory

  • Thread starter Thread starter bfgmatik
  • Start date Start date
  • Replies Replies 55
  • Views Views 4011
Declaring interest.
interested in
4x memories
1x programmer
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.
Declaring interest
1 x programmer
2 x Memory modules
1 x keyboard adapter
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.
Interested in one kickstart chip, one programmer and one keyboard adapter.
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.
Declaring interest in two times the Memory module 4 bank x 512KB - 25 EUR (27 USD) and
one Programmer with ZIF socket - 30 EUR (32 USD)
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.
For:
Memory module 4 bank x 512KB - 25 EUR (27 USD), X 1
Programmer with ZIF socket - 30 EUR (32 USD), X 1
A500 keyboard adapter with buffered reset output - 5 EUR, (5.5 USD) X 1
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
I updated the software to version 1.04. The main change is detection of too short bank or chip erase times which often mean that something was not connected properly or there is no memory module in the programmer. This should help tweaking any potential problems with memory module fitting or cable connections.

AmiRomProg v1.04 installer
AmiRomProg v1.04 executable
 
Declaring interest.

Declaring interest in two times the Memory module 4 bank x 512KB - 25 EUR (27 USD) and
one Programmer with ZIF socket - 30 EUR (32 USD)

(Marked as sold/completed by bfgmatik)
Received well packaged an in perfect condition! Thank you!
 
Just want to let you know:
I have installed the Kickstart ROM in an 1.8.5 Amiga 2000 Rev 6.2 remake board:
It works perfectly when connecting the RST of your ROM to Gary Pin 5 or U805 pin 14.
 
Declaring interest.
As I have still some Amigas to upgrade I would like to buy another

4 pcs of the ,memory module 4 bank x 512KB
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.
Interest in:

1 x programmer
2 x Kickstart
2 x keyboard adapter

(Interest withdrawn here)
 
Last edited:
Declaring interest.
Changed my mind, still have interest

Interest in:


1 x programmer
2 x Kickstart
2 x keyboard adapter
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.
I have 2 FlashromAdapterV1 by Matthias Münch (29F160).
Can I program them with your programmer?
Therefore i declare interst in 1 programmer.
(Marked as sold/completed by bfgmatik)
 
Last edited by a moderator:
Declaring interest.

I have 2 FlashromAdapterV1 by Matthias Münch (29F160).
Can I program them with your programmer?
Therefore i declare interst in 1 programmer.
I will be back at home on Friday and then i will check compatibility. Please let me know exactly what kind of memory do you have soldered to these modules because they all differ with memory sectors which need to be erased correctly.
 
I will be back at home on Friday and then i will check compatibility. Please let me know exactly what kind of memory do you have soldered to these modules because they all differ with memory sectors which need to be erased correctly.
ST M29F160FT / 55N3 / 99A01 VS / MYS 99 120 von Mouser (913-M29F160FT55N3E2)
i assume 5V and 55ns like all of them in TSOP48, pin compability with eeprom makes the PCB i think?
 

Interest Queue

  1. Marco06
  2. Neztik
  3. kaini
  4. fpmpaolo
  5. globaltrasher
  6. Oldman1000
  7. AwakeningStar
  8. Sirand
  9. VosCoBoss
  10. olma71
  11. kirk223
  12. olma71
  13. pigjes
  14. pigjes
  15. MarGe
  16. Sim085
  17. what_the_wasabi
Back
Top Bottom