A2000 with 3.1 Kickstart, Fusion'040 and 2MB Chipram

  • Thread starter Thread starter Cameraman
  • Start date Start date
  • Replies Replies 9
  • Views Views 2073
Status
Not open for further replies.

Cameraman

Member
Rating - 100%
10   0   0
Joined
Sep 5, 2012
Posts
104
Country
Netherlands
Region
ZH
I have for sale an Amiga 2000 with original 3.1 Kickstart rom, Fusion '040 and a DKB 2 MB Chip ram. GVP scsi controller.
It boots (although sometimes the Fusion 40 can be a bit temperamental and reseating it will usually make the system boot again).
36 MB ram total. I'll try to get a ZIP drive mounted so that the system will have a hard drive to use, I'm short on SCSI drives so I hope the ZIP will do.

Asking 550 Euro's ex Paypal fees. That includes shipping to all of Europe.

gk0TPhd.jpg

DodUSi8.jpg

fpajI1G.jpg

iCAlRfh.jpg

cZMJwwj.jpg

YZIw1Rw.jpg
 
Last edited:
Actually probably the most important question is how much would shipping to the US be. That's going to be the determining factor. Since a 2000 is so heavy it may be prohibitive but I can only ask :)

As far as pictures, primarily battery area, the cards, closeup of the accelerator and a whichamiga screenshot.

Thank you
 
You do realize if you're going to use it in the USA you'll at least need to replace the powersupply or somehow feed it 220Volts? Ans use a monitor if you don't want to run into PAL/NTSC issues...
If you're planning to put in a different powersupply I suggest we take this one out, its about the heaviest part and will save you on shipping...
 
Withdrawing interest. Sorry but the shipping is a bit too high for me. What was Commodore thinking putting all that heavy steel in this thing :)

Good luck with the sale!
 
Be keen to see some pics as potentially in the market for another Amiga (not officially declaring interest at this time)
 
Status
Not open for further replies.
Back
Top Bottom