touringsedan
New member
Also have the Aztek to CF on A3000 fail.
Also have the Aztek to CF on A3000 fail.
I can boot the Aztek CF on my A2000 with a GVP HC+8 Series II, albeit with a long pause at boot.
Yes, its terminated at both ends, doesn't make a difference, but it did work fine after the pause.
My A3000 has the new AMD 33C93A 16-PC chip installed.
Which does work fine with any of my old maxtor hard drives and a Plextor internal CD ROM.
But it hates the Aztek CF, does all kinds of crazy things, like when termination is set on the Aztek, the drives in the chain spin down.
1. Tried 3 different SCSI cables
2. Tried using different SCSI drives at the end of the chain with termination caps installed, also these drives work fine alone with termination in the A3000.
3. Tried putting it at the end, in the middle of three devices and the first.
Nothing for me will work with the Aztek and the A3000.
If I boot from floppy I can't see any SCSI devices while this Aztek card is in the loop.
Pretty bummed, really wanted this working in my A3000.
Also have the Aztek to CF on A3000 fail.
I can boot the Aztek CF on my A2000 with a GVP HC+8 Series II, albeit with a long pause at boot.
Yes, its terminated at both ends, doesn't make a difference, but it did work fine after the pause.
My A3000 has the new AMD 33C93A 16-PC chip installed.
Which does work fine with any of my old maxtor hard drives and a Plextor internal CD ROM.
But it hates the Aztek CF, does all kinds of crazy things, like when termination is set on the Aztek, the drives in the chain spin down.
1. Tried 3 different SCSI cables
2. Tried using different SCSI drives at the end of the chain with termination caps installed, also these drives work fine alone with termination in the A3000.
3. Tried putting it at the end, in the middle of three devices and the first.
Nothing for me will work with the Aztek and the A3000.
If I boot from floppy I can't see any SCSI devices while this Aztek card is in the loop.
Pretty bummed, really wanted this working in my A3000.