For Sale A4000T direct ATX adapter for modular PSU's

[a.mi.goun]

Originaly I was selling these for desktop A4000 in my thread here. Now I have similar cable for owners of A4000T as well.
Direct ATX adapter significantly helps to reduce cable clutter and makes nice direct connection between Amiga motherboard and PSU. A lot of modular ATX PSU's are supported such as Corsair, Seasonic, Coolermaster, Lian Li and other brands. Adapters for each brand are wired differently, I need to know for which PSU brand and model do you want to make the adapter.
As Amiga 4000T uses standard AT connectors for power, you can use the adapter for any AT PC as well.

Price for the adapter is 25€ + shipping (paypal friend/gift or SEPA banktransfer)
As modern ATX PSU do not provide -5V anymore, optionaly I can integrate -5V voltage module into adapter for additional 4,50€ (negative 5V is rarely used, but few older expansion cards may need it)
UPDATE: All adapters now supplied with Full voltage monitoring (all sensing wires are connected).

 

[JHanna]

Question: Why are they wired differently? I thought all ATX PSUs were the same?

Also, can you think of ANY cards that need the -5v rail? Thanks!

 

[JHanna]

Declaring interest.

---

Declaring interest in an A4000T adapter for a Corsair RM Series 650W (Type 4) PSU. I don't think I need the -5v option.

---

(Marked as sold/completed by a.mi.goun)

 

[JHanna]

PM sent

 

[a.mi.goun]

Question: Why are they wired differently? I thought all ATX PSUs were the same?

Also, can you think of ANY cards that need the -5v rail? Thanks!

Modular PSUs usualy have different connections, so for direct adapter you need proper wiring. Or alternatively when using original PSUs ATX cable you can use standard ATX-AT adapter.

Possibly very few expansions require -5V, I did not have any of those, but recently I was reading an article of user that discovered that Picasso II graphics card did not work correctly for him without -5V connected.

 

[JHanna]

Payment sent.

 

[costner460]

Declaring interest.

---

Hello, I have the original A4000t and would like to replace the power supply with a new one. I need 3 adapters for the original A4000t board to connect the ATX power supply

---

(Interest withdrawn here)

 

[JHanna]

Declaring interest.

---

Hello, I have the original A4000t and would like to replace the power supply with a new one. I need 3 adapters for the original A4000t board to connect the ATX power supply

You need to specify which brand of PSU you are using too.

 

[costner460]

PSU

 

[a.mi.goun]

costner460: Your power supply is not modular, but you can use my standard AT-ATX Power Supply Adapter adapter listed here.

 

[costner460]

Interest withdrawn. (was previously declared here)

 

[JHanna]

Received today. Very high quality.

Sadly damaged in post but I can solder the affected spade connector, so no big deal.

 

[4MlGA]

Declaring interest.

---

for Corsair SF600 (without negative 5v)

---

(Marked as sold/completed by a.mi.goun)

 

[ctrlbreak]

Declaring interest.

---

Declaring interest in an A4000T adapter for a Corsair RM Series 650W, inc -5V please!

---

(Marked as sold/completed by a.mi.goun)

 

[wstlr]

Adapter received and positive feedback left, thanks @a.mi.goun!

 

[qz3fwd]

Declaring interest.

---

Declaring interest x 4

 

[DocLeisure]

Declaring interest.

1x in an A4000T adapter for a Seasonic Focus PX-550, incl. -5V please!

---

(Marked as sold/completed by a.mi.goun)

 

[utukku]

Declaring interest.

---

Declaring interest in 1 x A4000T adaptor with -5V module & full voltage monitoring. To be used with :

CORSAIR RM650 80 PLUS Gold Fully Modular Low-Noise ATX 650 Watt Power Supply​

---

(Marked as sold/completed by a.mi.goun)

 

[utukku]

Payment made.

 

[screemo]

Declaring interest.

---

1pcs