Closed A600 Rev. 2D 2 mb Chip + CF + WB 2.1

[BlindGerMan]

Hi out there,

I am selling a fully working Commodore Amiga A600, with a rev. 2D board and a soldered Kickstart 37.350. Remember to change the caps as I do not have the skill to do that!

The casing is in good condition, some scratches, one plastic nose is broken and it is a bit yellowed. It has a German qwertz Keyboard with some yellowed keys.

There is a 1 mb Chipmem upgrade mounted in the trapdoor, so that this A600 has a total of 2 mb of chipmem!

It is fitted with a 512 MB CF Card as a hard disk (well, with the used adapter, the HDD led is not working), installed WB 2.1 on it. I did the install from the included disks using the mounted Chinon FZ-354 floppy drive, so the disks and the drive are tested working!

I will include a A1200 PSU 3.0A, a original Commodore tank mouse, a WB 2.1 disk set (seems to be original, but my only be a printed label) a well as German Workbench 2.1 manual and a Netherlands A600HD manual.

So you get a nice A600 set, ready to work and ready to upgrade with Jens ACA-620!

Asking 99 EUR + shipping + PayPal!

 

[fitzsteve]

Just to add some info for you, if the buyer intends to buy an ACA6xx they don't need to worry about the fact the Kickstart is soldered they can map any Kickstart they like from Image using the ACA's 'Maprom' function including their own custom Roms!

I assume since you mention this you already tested the A600 with an ACA? I ask that because some A600 are not compatible with or can have connectivity issues due to hairline cracks in CPU legs.

Good luck with your sale

 

[BlindGerMan]

Well, it is tested with a M-Tec 630 as I do not own an ACA-630...

 

[BlindGerMan]

Price drop -> 105 EUR

 

[BlindGerMan]

Price drop -> 99 EUR

 

[BlindGerMan]

Sold locally, so please close!