Sold ACARD 7730A - SCSI to SATA

[ShK]

Item received, all good. Positive feedback is left!

 

[GUILPAT]

Hi k0x, interested to buy

ACARD 7730A - SCSI to SATA​

What is your price with sending to France please ?
Regards

 

[k0x]

Hi k0x, interested to buy

ACARD 7730A - SCSI to SATA​

What is your price with sending to France please ?
Regards

300Eur including shipping

 

[GUILPAT]

Thanks for answer, I'm not ready at this price for now, have you some stock in the future ?

 

[matt3k]

Interested in one or two pending questions:

Do you know the firmware version of them?

Do you know if they work with the Warp Engine SCSI?

 

[k0x]

Firwmare version 1.72

It will work on WarpEngine SCSI but it will be not as fast.
You will need 68to50 pin adapter as well.

 

[matt3k]

What speed should I expect from it on a Warp Engine SCSI with a fast SSD?

 

[k0x]

Fast SCSI 2 controller

• NCR 53C710 @ 40 MHz

• 32 bit SCSI host bus DMA interface supporting burst to/from RAM

• max 10 MB/s synchronous transfer speed

 

[matt3k]

I'm good with 10 MB per second. For some reason Acards 2000SUP's don't work with Warp Engines. The firmware versions are earlier though, so maybe that is it.

PM Sent...

 

[matt3k]

Payment sent for one.

 

[k0x]

Package sent - tracking via PM.

 

[matt3k]

As I was worried (based on my experience with other acard solutions I tried with the Warp Engine), this does not work with the warp engine scsi. If anyone has had luck with this Acard on a Warp Engine SCSI let me know, but tested for a while and nothing. Hooked up a scsi2sd rev 6 to the warp engine and booted just fine... I will likely sell it for what I paid for it if I can't get it working.

 

[pedgaard]

Still1 available?

 

[k0x]

Still1 available?

Yes, still available.

 

[RetroFan19]

Declaring interest.

---

(Marked as sold/completed by k0x)

 

[RetroFan19]

Payment sent

 

[k0x]

Payment received & package sent.

 

[RetroFan19]

Item received. Positive feedback is left and sorry for my late answer.

 

[nkintz]

As I was worried (based on my experience with other acard solutions I tried with the Warp Engine), this does not work with the warp engine scsi. If anyone has had luck with this Acard on a Warp Engine SCSI let me know, but tested for a while and nothing. Hooked up a scsi2sd rev 6 to the warp engine and booted just fine... I will likely sell it for what I paid for it if I can't get it working.

@matt3k , are you still looking to sell your Acard? I'm in the US as well.

 

[nkintz]

Declaring interest.

---

(Marked as sold/completed by k0x)