For Sale: NOS Acard UW-SCSI to IDE adapters (Model ARS-2000LFS)
Tested working on my Cyberstorm MK3, A3000 SCSI and A590 with Guru ROM.
Read speed on MK3 with my CF card 29MB/s. (marginally faster than 7720UW with same card)
Read before declaring interest:
Note: Please pay in EUR. (My local currency NOK might come up as default, please change it to EUR)
Buyer pays fees.
Available: 0 units (Was 10)
Sold:
1 - Lord - sent (untracked)
2 - Patrikax - sent (untracked)
2 - Maikt - sent (tracked package)
1 - BULI - sent (registered letter)
1 - Sveta - sent (untracked)
1 - Nobodyii - sent (registered letter)
1 - BlindGerman - sent (registered letter)
1 - Timmie - sent (untracked)
Next in Line:
1 - Raketa
Shipping costs
As untracked letter (your risk): Europe 13 EUR, World 15 EUR
As tracked package (Shared risk): World 32 EUR
Without the original packaging, I can also send as registered letter (max 2 cm) for 21 EUR (World).
The two last pics show how it would be inside envelope. Manual (Thick, 46 pages) covers component side, other sides are metal and should be fine.
Tested working on my Cyberstorm MK3, A3000 SCSI and A590 with Guru ROM.
Read speed on MK3 with my CF card 29MB/s. (marginally faster than 7720UW with same card)
Read before declaring interest:
- It does NOT have termination, so use an active terminator or connect it between the controller and another device
- Being a UW-SCSI unit, it has a 68 pin connector. (The adapter is LVD/SE, but has a force SE switch)
- It works fine on my CS MK3, A3000 and A590 (Guru ROM), but I make no guarantees on compatibility. It's probably less compatible than the expensive 7720UW model.
- I've used 68p SCSI cables with active terminators and 68-50p adapters for A3000 and A590. Not sure if it works the other way (50p cable with adapter to 68p) I had one go with a 50p cable on a Warp Engine but I was unsuccessful, and unable to test wth a 68p cable at the time.
- Read configuration in HDToolbox works with HDDs (See image 4), but like some other scsi-ide bridges it doesn't always read CF correctly. (Depending on CF card)
But when prepped (By typing in drive geometry manually, or prepping in WinUAE or other amiga) it is working fine.
Note: Please pay in EUR. (My local currency NOK might come up as default, please change it to EUR)
Buyer pays fees.
Available: 0 units (Was 10)
Sold:
1 - Lord - sent (untracked)
2 - Patrikax - sent (untracked)
2 - Maikt - sent (tracked package)
1 - BULI - sent (registered letter)
1 - Sveta - sent (untracked)
1 - Nobodyii - sent (registered letter)
1 - BlindGerman - sent (registered letter)
1 - Timmie - sent (untracked)
Next in Line:
1 - Raketa
Shipping costs
As untracked letter (your risk): Europe 13 EUR, World 15 EUR
As tracked package (Shared risk): World 32 EUR
Without the original packaging, I can also send as registered letter (max 2 cm) for 21 EUR (World).
The two last pics show how it would be inside envelope. Manual (Thick, 46 pages) covers component side, other sides are metal and should be fine.
Last edited:
