Adapter allows the use of an ATX power supply unit for an Amiga 2000 or Amiga 3000. PAL or NTSC Tick.
Provides all voltages (+5v, +12v, -12v, -5v, ground) from the ATX PSU
-5v is derived from the -12v rail via the onboard voltage regulator
Tick signal is derived from the v5v
Jumper selection allows signal to be 50Hz PAL or 60Hz NTSC
Standby +5v power for any "always on" devices.
Polymer Aluminum Capacitors
Simple diode protected reset circuit (must be connected to keyboard reset).
Cables/Power switch not included.
I have 4 of these left. I am asking 45 dollars plus shipping.
Provides all voltages (+5v, +12v, -12v, -5v, ground) from the ATX PSU
-5v is derived from the -12v rail via the onboard voltage regulator
Tick signal is derived from the v5v
Jumper selection allows signal to be 50Hz PAL or 60Hz NTSC
Standby +5v power for any "always on" devices.
Polymer Aluminum Capacitors
Simple diode protected reset circuit (must be connected to keyboard reset).
Cables/Power switch not included.
I have 4 of these left. I am asking 45 dollars plus shipping.
Attachments
Last edited:
