mikerm
New member
Selling my 4000 Desktop since I now have a tower. This was my main miggy!
The machine itself:
3.1 Roms
16mb ram on motherboard
Stock A3640 CPU Card (v3.1)
ATX-modded psu (original died, see here.)
Floppy is a Chinon FZ-357A (HD)
Battery has been replaced with a coin cell mod, but some damage had
been done (keyboard and mouse circuit) and since been repaired.
Original caps I believe, but no leakage or problems that I know of.
The CD-ROM drive that was in it had died, so unfortunately not included.
I used a cf card adapter, so there is a short IDE stub cable included where the adapter was.
Drive mounting bracket included.
Picture is shown with monitor to show that it works, monitor is not included!
Keyboards:
Original 4000 keyboard included, but has problems. The left Alt and Amiga keys don't work. Traces look fine, but I couldn't figure it out.
Amiga 2000 keyboard with the 4000's keyboard cable cable.
I am also throwing in the 2000's cable (not pictured), and another 2000 keyboard.
(3 keyboards total)
Mice:
2 "Tank" mice, one works, the other one has had a repaired plug and is missing the mouse ball. Unknown if it works.
AmiTek Trackball - works
Boards:
A2065 10baseT Ethernet - works
A2301 Genlock - unknown
GVP A2000-HC+8 Series II Rev II SCSI (with 8mb) - works
NewTek Digi View Gold 4 with extra hardware - unknown
AMax Macintosh Emulator software with floppy connector hardware - unknown
Macintosh floppy drive - unknown
SupraModem 2400zi - unknown
But wait, there's more:
1 Single device rounded SCSI cable - works
1 2 device ribbon scsi cable - works
1 floppy ribbon cable - works
Netgear 10/100 hub with 10baseT - works
10baseT network cable with T's and terminators - works
2400 baud modem with psu - unknown
1 Synchro Express III - unknown
2 power cables (one for the hub and one for the 4kd) - works
and finally:
Original Video Toaster with manual and software. I am including multiple sets of original disks in hopes that one set actually works. The card is presumed to work fine but is untested. Also included is an older original manual for the Toaster software. - unknown
Pictures (click to enlarge):
$400usd + shipping (about $60 in the US, will ship worldwide) Paypal.
The machine itself:
3.1 Roms
16mb ram on motherboard
Stock A3640 CPU Card (v3.1)
ATX-modded psu (original died, see here.)
Floppy is a Chinon FZ-357A (HD)
Battery has been replaced with a coin cell mod, but some damage had
been done (keyboard and mouse circuit) and since been repaired.
Original caps I believe, but no leakage or problems that I know of.
The CD-ROM drive that was in it had died, so unfortunately not included.
I used a cf card adapter, so there is a short IDE stub cable included where the adapter was.
Drive mounting bracket included.
Picture is shown with monitor to show that it works, monitor is not included!
Keyboards:
Original 4000 keyboard included, but has problems. The left Alt and Amiga keys don't work. Traces look fine, but I couldn't figure it out.
Amiga 2000 keyboard with the 4000's keyboard cable cable.
I am also throwing in the 2000's cable (not pictured), and another 2000 keyboard.
(3 keyboards total)
Mice:
2 "Tank" mice, one works, the other one has had a repaired plug and is missing the mouse ball. Unknown if it works.
AmiTek Trackball - works
Boards:
A2065 10baseT Ethernet - works
A2301 Genlock - unknown
GVP A2000-HC+8 Series II Rev II SCSI (with 8mb) - works
NewTek Digi View Gold 4 with extra hardware - unknown
AMax Macintosh Emulator software with floppy connector hardware - unknown
Macintosh floppy drive - unknown
SupraModem 2400zi - unknown
But wait, there's more:
1 Single device rounded SCSI cable - works
1 2 device ribbon scsi cable - works
1 floppy ribbon cable - works
Netgear 10/100 hub with 10baseT - works
10baseT network cable with T's and terminators - works
2400 baud modem with psu - unknown
1 Synchro Express III - unknown
2 power cables (one for the hub and one for the 4kd) - works
and finally:
Original Video Toaster with manual and software. I am including multiple sets of original disks in hopes that one set actually works. The card is presumed to work fine but is untested. Also included is an older original manual for the Toaster software. - unknown
Pictures (click to enlarge):
$400usd + shipping (about $60 in the US, will ship worldwide) Paypal.
Last edited:
