Craziazkowboi
Member
68030 accelerator Amiga 500, 1000 (not piggyback), or 2000 (with adapter). Gold immersion PCB built and purchased from https://amiga68k.com, very high swiss-quality card. Twice as fast as a stock Amiga 3000, and over-clockable to 60Mhz using onboard jumpers.
Possible settings for the CPU frequencies include: 14, 15, 17, 20, 25, 28, 30, 35, 40, 42 , 50 and 60 MHz
This MC68882FN40A can be overclocked to 50 MHz, but unstable if pushed further. Jumpers allow FPU to run at half speed of CPU if looking for a 60MHz CPU / 30MHz FPU config. Noting on my machine, the most stable config was 50/50 and that is what I ran with.
- Motorola 68030 based CPU accelerator board (50MHz)
- Motorola 68882 FPU (40MHz)
- Including 128 MB of Fast-RAM running up to 120MHz
- IDE controller with on-board auto-boot ROM, using lide driver. Tested with CF Cards and SATA drive (with StarTech 40 pin IDE-SATA converter)
https://gitlab.com/MHeinrichs/68030-tk2
or
official support thread
I have used this in my Amiga 1000, and Phoenix Amiga 1000 for almost a year and it has been my favourite accelerator card. I am now downsizing my collection to focus my Amiga obsession and make space.
Take advantage of the conversion from AUD, I am asking $500AUD + shipping.
+$15 for A500 Relocator if required.
PayID, bank transfer preferred, PayPal if necessary.
