AMIGA CASE : Crowdfunding project New computer case for classic Amiga 1200 / Thin Mini-ITX / Raspberry PI

  • Thread starter Thread starter Schuimpy
  • Start date Start date
  • Replies Replies 176
  • Views Views 39766
Status
Not open for further replies.
Good to see the progress and that you are actually showing some stuff (even if it's 3d screenshot).

Do you know how much you will be asking?
 
Available from € 59,- for one AMIGA CASE (limited early bird edition)
 Available from € 55,- per AMIGA CASE if you contribute for two cases. (Available during the whole campaign).

Gouky said:
Good to see the progress and that you are actually showing some stuff (even if it's 3d screenshot).

Do you know how much you will be asking?
Click to expand...
 
NP, For now the only thing I can say about that is that it will be less than the other great project. For the actual amount / funds needed you have to wait until the launch.

Gouky said:
Sorry, I meant how much fund do you need for this project to exist :)
Click to expand...
 
I might be interested but am put off by the 'case' text in the render. It's ok to have it on the bottom but it's like having putting up for the full version and instead go for the cheaper ad funded version especially if I have an Amiga inside, I guess if I'd have a raspberry pi I'd not care.

Nice work though.
 
I'm interested for my existing 1200! Especially in black if I can find somewhere that could supply a black Amiga keyboard. Any ideas on where I could get that?
 
allanmb said:
I'm interested for my existing 1200! Especially in black if I can find somewhere that could supply a black Amiga keyboard. Any ideas on where I could get that?
Click to expand...

find a "broken" CDTV Keyboard and change the Key Caps over

must emphasize the word Broken lol or you would upset a lot of people doing it to Working one :lol:

or you never know if this team do well on the project maybe they will make the keycap or hole keyboards in the future
 
Last edited:
allanmb said:
I'm interested for my existing 1200! Especially in black if I can find somewhere that could supply a black Amiga keyboard. Any ideas on where I could get that?
Click to expand...

You could also paint the keys yourself and finish them with Amiga key cap stickers - Humbrol 85 Satin is the correct colour and finish :)
 
Just wish you succeed - it seems to me the previous Kickstarter project has some serious problems...
 
As a backer of the "other" project can you explain the problems - I believe they have delayed by one month to ensure things are done correctly / doesn't seem serious to me?


Sent from my iPhone using Tapatalk
 
As a backer of the "other" project can you explain the problems - I believe they have delayed by one month to ensure things are done correctly / doesn't seem serious to me?
Click to expand...


I agree. Sounds like FUD. Things seem like they are going well.

C64 keys project on Indiegogo, however, is not going well. :(
 
Don't know where you're getting that info from, the molds are being delivered to the factory at some point in the next fortnight, and the production run will occur sometime the week following with all cases being dispatched in the last week of April or first week of May - as per project updates... Doesn't seem like much of an issue to me!
Romanujan said:
Just wish you succeed - it seems to me the previous Kickstarter project has some serious problems...
Click to expand...
 
Hi Guys,

Please stay on topic of this thread, The AMIGA CASE. Please discuss the other project in the appropriate thread. People may/can get confused.

Thank you.

Cozzer79 said:
Don't know where you're getting that info from, the molds are being delivered to the factory at some point in the next fortnight, and the production run will occur sometime the week following with all cases being dispatched in the last week of April or first week of May - as per project updates... Doesn't seem like much of an issue to me!
Romanujan said:
Just wish you succeed - it seems to me the previous Kickstarter project has some serious problems...
Click to expand...
Click to expand...
 
NoPyroNoParty said:
I might be interested but am put off by the 'case' text in the render. It's ok to have it on the bottom but it's like having putting up for the full version and instead go for the cheaper ad funded version especially if I have an Amiga inside, I guess if I'd have a raspberry pi I'd not care.

Nice work though.
Click to expand...

This is a good point. I don't mind it- actually, as long as it's not in the traditional Amiga logo placement i kind of like it (i like the way the first and last letter join - a modernisation of the logo), but might it put off some?
 
Hi Guys, You are missing an very important update 26-03-2016 !!

The AMIGA CASE project is officially licensed by Amiga Inc. which means the original Amiga logo just like on your classic amiga 1200 will be used on the AMIGA CASE.

I updated the photo's, see my first post / start of this thread.

Thank you.

DerekP said:
NoPyroNoParty said:
I might be interested but am put off by the 'case' text in the render. It's ok to have it on the bottom but it's like having putting up for the full version and instead go for the cheaper ad funded version especially if I have an Amiga inside, I guess if I'd have a raspberry pi I'd not care.

Nice work though.
Click to expand...

This is a good point. I don't mind it- actually, as long as it's not in the traditional Amiga logo placement i kind of like it (i like the way the first and last letter join - a modernisation of the logo), but might it put off some?
Click to expand...
 
Last edited:
I still see "Amiga Case" logo - not just "Amiga" on the 1st, 4th and 5th pictures. This is fine with me - i actually prefer it. But it should be clarified. :)
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom