AMIGA External Floppy Drive adapter - GOTEK compatible !

  • Thread starter Thread starter tony1999it
  • Start date Start date
  • Replies Replies 144
  • Views Views 25922
Status
Not open for further replies.
Hello udated photos in the first post of the thread of the latest version of the board.
Soon will be fixed the website also.

For StrongARM and Rakeim132I ofcourse I shipped the latest version.

- - - Updated - - -

Rakeim132 said:
tony1999it said:
StrongARM said:
I declare interest in 1 piece delivering to Germany.

rev. 2.3 here too. ;)
Click to expand...


Pm sent

- - - Updated - - -

Rakeim132 said:
Declaring interest in 1x Rev 2.3 adapter to be shipped in Australia.
FYI all your pictures do not display on Tapatalk (iPhone). Both website and page 7 of this thread.
Click to expand...

Pm sent
Click to expand...

Money and address sent in PayPal payment notes. Thanks mate!
Click to expand...

Both items shipped
 
Last edited:
Jaymz said:
Hi, can you boot from this?

Cheers.
Click to expand...

Hi,
an external drive can boot on amiga500 if you have installed a boot selector. On Amiga 600 and up it's possible to boot from external drive by keeping pressed the mouse button at the boot and selecting the external drive as boot drive.

So if you have an amiga500 with boot selector or an amiga 600 and up this adapter allow you to boot from the secondary drive DF1.
 
Don’t suppose there’s an internal version of this to make use of one or two Amiga or PC floppies in an A2000/A2500/A3000/A4000...?


Sent from my iPhone using Tapatalk
 
Casey4147 said:
Don’t suppose there’s an internal version of this to make use of one or two Amiga or PC floppies in an A2000/A2500/A3000/A4000...?

Hi,
I'm designing a version that fit in an external case of a floppy drive. So if you have an external amiga floppy drive with the interface not working you can replace it fitting this new version of the adapter and re-using the old DB23 cable and the old DB23 female connector (the last one just if you want to have the possibility to connect other external drives).

For the "internal version" how it should be done ? Imagine .... it should be connected directly on the flat cable connector on the motherboard and exit with a flat cable that allow to install up to two amiga or/and PC drives ?
Let me know.
Click to expand...
 
Last edited:
Hi,
Do you have photo of interface? How large is it? Is it available to ship to the US?
Which drives have been tested and can I use a Gotek for df0: at the same time?
Thanks. I have a Samsung, Teac, Mitsumi and Toshiba PC drives.
I've tried 2 interfaces (one without a chip) and one that only works for Gotek.
How compatible with drives is yours?
 
Last edited:
cevoner said:
Hi,
Do you have photo of interface? How large is it? Is it available to ship to the US?
Which drives have been tested and can I use a Gotek for df0: at the same time?
Thanks. I have a Samsung, Teac, Mitsumi and Toshiba PC drives.
I've tried 2 interfaces (one without a chip) and one that only works for Gotek.
How compatible with drives is yours?
Click to expand...


Hello,
below the answers to your questions:

Do you have photo of interface?
Yes. The photos are in first post of this thread.

How large is it?
6cm x 3.6cm

Is it available to ship to the US?
Yes shipping to USA is 4.50€ as ordinary mail or 11.00€ as tracked one.

Which drives have been tested and can I use a Gotek for df0: at the same time?
This interface supports secondary drives PC or Amiga compatibles. The secondary drives will work as DSF1 without any problem with the DF0 installed (genuine amiga drive or gotek). Several drives have been tested as genuine PC or amiga modded: Teac, Samsung, citizen, mitsumi, alps, sony, teac and others.

Thanks. I have a Samsung, Teac, Mitsumi and Toshiba PC drives.
I've tried 2 interfaces (one without a chip) and one that only works for Gotek.
How compatible with drives is yours?
My interface is fully compatible with genuine PC drives AND amiga drives (genuine or PC modded). You just need to configure the interface in order to install a PC or an amiga drive. Please check the configuration instructions in the first post of this thread or on my website www.vintage-computers.it

Let me know if you need more info.
 
Last edited:
Thanks for the info

Thanks for the info

I sent an email via your web page's email address with inquiry
on how to order. This looks like a real interface. The others I have just makes the drives click
and workbench says disk unreadable.
 
Status
Not open for further replies.

Similar threads

tony1999it
For Sale Amiga dual external floppy drive adapter
Replies
15
Views
1K
ElectroBlaster
E
tony1999it
For Sale External floppy drive adapter for Amiga computers.
Replies
9
Views
1K
tony1999it
tony1999it
tony1999it
  • Locked
Amiga External Floppy Drive Interface - NEW version ! Compatible with PC and Amiga Drives !!
2 3 4
Replies
67
Views
14K
marmotta
M
Back
Top Bottom