PCB:s that were ordered in 10 or 5 piece quantity, I will sell the extra pieces for cheap.
Pictures and links may be added soon or later (In Commodore department, C64 project PCB are for sale)
I will list now as collection of pcb:s - Collection 1 each. Prices set up new 19.3.2025, previous price at bottom
Price: shipping 250 grammes untracked: Europe 8.25 €, World 19.25 € (or world economy super slow 10€)
All 3 groups 45€ (was 48€) + shipping 500 g: Europe 13.75€ World 33€ (economy 17.50€)
Group 1: About 9 extras each (for sale also elsewhere)
12 boards 1 each, 12€, shipping 100 g : Europe 5.50€, World 11€ (economy 5.80€)
GOTEK to AMIGA EXTERNAL CONNECTION ADAPTER (IDC CONNECTOR VERSION) the odd numbered ground pads are not connected
Amiga External Floppy Adapter v1.3
HID2AMI v2.0.2 with Mousewheel Support and new unified firmware v3.0.x
Amiga 2000 / 3000 / 500 Keyboard USB adapter Amiga Keyboard to USB HID (PC etc.) adapter board uses module Arduino Pro Micro
Keyboard adapter board uses AT89C2051 Do not be sad if your Amiga 500 keyboard is not working. AMIGA 500 PS/2 KEYBOARD ADAPTER will help you.
Flash the floppy access light for internal IDE interface access on an AMIGA 500 . Small IDE to floppy led board
6522/6526/8520 VIA/CIA diode board (top BAT54S VCC/GND clamping diodes, bottom SOT-23 double TVS diode on external IO) proto has small holes.
mem68k-v67 mem68k ram68k link
mem68k-v69p2 (10 pcs add +9€ and shipping) mem68k ram68k link
IDE68K 425-i-dr14 amibay (10 pcs add +7€ and shipping)
multiple DIP-64 footprints "riser/relocator" board with "uncommitted" ground plane (rotate/flip board)
LPT-port ATF GAL programmer ATFblast by Bruce Abbott with added PLCC-footprints (UNTESTED) Original https://bhabbott.net.nz/atfblast.html
I can send the edited sch and brd files by email
Group 2: About 4 pcs extra for sale
26 boards 1 each, 30€ (was 32 €), shipping 250 g: Europe 8.25€, World 19.25€ (economy 10€)
The flash relocator separately
A2000 86-pin slot DIP-64 "cpu slot" adapter (Sukkopera) OpenAmiga2000CoproAdapter_V3 (4)
A600 1Meg chip ram expansion / clock (Sukkopera) OpenAmiga600RamExpansion_V (4)
tsop flash to KS-socket adapter Amiga Flash ROM Adapter V1 (40 Pin) (4)
tsop flash to KS-socket adapter Commodore AMIGA 500 600 2000 Kickstart 29F800 FLASH DIL TSOP (4)
Amiga to VGA adapter Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC No Jail bars (4)
Amiga to VGA adapter AMIGA 15KHZ DISPLAY ADAPTER (Amiga VGA sync adapter) (4)
IDE68K 426 (rare prototype of V429) Amibay
IDE68K 426-RI (rare, reverse connector)
IDE68K 427-m44pin2mm (rare)
IDE68K 428-RA (rare, right angle connector)
IDE68K 430-f44 (rare)
mem68k-v66 (rare) mem68k ram68k link
PLCC Denise to DIP adapter amibay fs-thread
PLCC Paula to DIP adapter
PLCC CIA to DIP adapter (untested)
protapp3.0 prototype DB25M/IDC26 DM25F/IDC26 external parallel port esd protection (sot-23-3 or sot-23-6 esd diodes)
two/four PLCC-32 29F040 to KS-ROM adapters: closed amibay thread These may have traces very close to pads, watch out for shorts
rev7A
rev9DL (left offset)
rev9DR (right offset)
double rev9D version 4xplcc to 2xdip-40/42: 0.1" grid distance of roms
double rev9D version 4xplcc to 2xdip-40/42: 0.2" grid distance of roms
68000 DIP-64 to PLCC-68 adapter
68000 DIP-64 to DIP-64 with GND/VCC planes
68000 DIP-64 to ShrinkDIP-64 68HC000B(upside down)
CompactFlash to IDE (40pin) adapter. VCC on pin 20. Card on "bottom"
DIP-20 to SOJ-20/26 DRAM 256k x 4 adapter amibay
LC4128 CPLD break-out/LED board UNTESTED
Group 3/single:
4-layer 68000 relocator with DIP-32 flash footprints for KS, uses cpld XC9572XL vqfp-44. By PR77: https://github.com/PR77/68000_Relocator_FLASH_Kickstart
8€ + shipping 50 g: Europe 3.65€, World 5.50€
Pictures and links may be added soon or later (In Commodore department, C64 project PCB are for sale)
I will list now as collection of pcb:s - Collection 1 each. Prices set up new 19.3.2025, previous price at bottom
Price: shipping 250 grammes untracked: Europe 8.25 €, World 19.25 € (or world economy super slow 10€)
All 3 groups 45€ (was 48€) + shipping 500 g: Europe 13.75€ World 33€ (economy 17.50€)
Group 1: About 9 extras each (for sale also elsewhere)
12 boards 1 each, 12€, shipping 100 g : Europe 5.50€, World 11€ (economy 5.80€)
GOTEK to AMIGA EXTERNAL CONNECTION ADAPTER (IDC CONNECTOR VERSION) the odd numbered ground pads are not connected
Amiga External Floppy Adapter v1.3
HID2AMI v2.0.2 with Mousewheel Support and new unified firmware v3.0.x
Amiga 2000 / 3000 / 500 Keyboard USB adapter Amiga Keyboard to USB HID (PC etc.) adapter board uses module Arduino Pro Micro
Keyboard adapter board uses AT89C2051 Do not be sad if your Amiga 500 keyboard is not working. AMIGA 500 PS/2 KEYBOARD ADAPTER will help you.
Flash the floppy access light for internal IDE interface access on an AMIGA 500 . Small IDE to floppy led board
6522/6526/8520 VIA/CIA diode board (top BAT54S VCC/GND clamping diodes, bottom SOT-23 double TVS diode on external IO) proto has small holes.
mem68k-v67 mem68k ram68k link
mem68k-v69p2 (10 pcs add +9€ and shipping) mem68k ram68k link
IDE68K 425-i-dr14 amibay (10 pcs add +7€ and shipping)
multiple DIP-64 footprints "riser/relocator" board with "uncommitted" ground plane (rotate/flip board)
LPT-port ATF GAL programmer ATFblast by Bruce Abbott with added PLCC-footprints (UNTESTED) Original https://bhabbott.net.nz/atfblast.html
I can send the edited sch and brd files by email
Group 2: About 4 pcs extra for sale
26 boards 1 each, 30€ (was 32 €), shipping 250 g: Europe 8.25€, World 19.25€ (economy 10€)
The flash relocator separately
A2000 86-pin slot DIP-64 "cpu slot" adapter (Sukkopera) OpenAmiga2000CoproAdapter_V3 (4)
A600 1Meg chip ram expansion / clock (Sukkopera) OpenAmiga600RamExpansion_V (4)
tsop flash to KS-socket adapter Amiga Flash ROM Adapter V1 (40 Pin) (4)
tsop flash to KS-socket adapter Commodore AMIGA 500 600 2000 Kickstart 29F800 FLASH DIL TSOP (4)
Amiga to VGA adapter Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC No Jail bars (4)
Amiga to VGA adapter AMIGA 15KHZ DISPLAY ADAPTER (Amiga VGA sync adapter) (4)
IDE68K 426 (rare prototype of V429) Amibay
IDE68K 426-RI (rare, reverse connector)
IDE68K 427-m44pin2mm (rare)
IDE68K 428-RA (rare, right angle connector)
IDE68K 430-f44 (rare)
mem68k-v66 (rare) mem68k ram68k link
PLCC Denise to DIP adapter amibay fs-thread
PLCC Paula to DIP adapter
PLCC CIA to DIP adapter (untested)
protapp3.0 prototype DB25M/IDC26 DM25F/IDC26 external parallel port esd protection (sot-23-3 or sot-23-6 esd diodes)
two/four PLCC-32 29F040 to KS-ROM adapters: closed amibay thread These may have traces very close to pads, watch out for shorts
rev7A
rev9DL (left offset)
rev9DR (right offset)
double rev9D version 4xplcc to 2xdip-40/42: 0.1" grid distance of roms
double rev9D version 4xplcc to 2xdip-40/42: 0.2" grid distance of roms
68000 DIP-64 to PLCC-68 adapter
68000 DIP-64 to DIP-64 with GND/VCC planes
68000 DIP-64 to ShrinkDIP-64 68HC000B(upside down)
CompactFlash to IDE (40pin) adapter. VCC on pin 20. Card on "bottom"
DIP-20 to SOJ-20/26 DRAM 256k x 4 adapter amibay
LC4128 CPLD break-out/LED board UNTESTED
Group 3/single:
4-layer 68000 relocator with DIP-32 flash footprints for KS, uses cpld XC9572XL vqfp-44. By PR77: https://github.com/PR77/68000_Relocator_FLASH_Kickstart
8€ + shipping 50 g: Europe 3.65€, World 5.50€
A2000 86-pin slot DIP-64 "cpu slot" adapter (Sukkopera) OpenAmiga2000CoproAdapter_V3 (4)
Note: Card edges are not beveled. This may not be greatest for the socket connector, also hot air surface leveling for cheapnes.
A600 1Meg chip ram expansion / clock (Sukkopera) OpenAmiga600RamExpansion_V (4)
tsop flash to KS-socket adapter Amiga Flash ROM Adapter V1 (40 Pin) (4)
tsop flash to KS-socket adapter Commodore AMIGA 500 600 2000 Kickstart 29F800 FLASH DIL TSOP (4)
Amiga to VGA adapter Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC No Jail bars (4)
Amiga to VGA adapter AMIGA 15KHZ DISPLAY ADAPTER (Amiga VGA sync adapter) (4)
Amiga to Gotek GOTEK to AMIGA EXTERNAL CONNECTION ADAPTER (IDC CONNECTOR VERSION)
Amiga to external floppy Amiga External Floppy Adapter v1.3
HID2AMI HID2AMI v2.0.2 with Mousewheel Support and new unified firmware v3.0.x
Amiga Keyboard to USB HID (PC etc.) adapter board uses module Arduino Pro Micro Amiga 2000 / 3000 / 500 Keyboard USB adapter
Keyboard adapter board uses AT89C2051Do not be sad if your Amiga 500 keyboard is not working. AMIGA 500 PS/2 KEYBOARD ADAPTER will help you.
Small IDE to floppy led board Flash the floppy access light for internal IDE interface access on an AMIGA 500 .
IDE68K 425-i-dr14 amibay
IDE68K 426 (rare prototype of V429)
IDE68K 426-RI (rare, reverse connector)
IDE68K 427-m44pin2mm (rare)
IDE68K 428-RA (rare, right angle connector)
IDE68K 430-f44 (rare)
mem68k-v66 (rare) mem68k ram68k link
mem68k-v67
mem68k-v69p2 (10 pcs add +9€ and shipping)
PLCC Denise to DIP adapter amibay fs-thread
PLCC Paula to DIP adapter
PLCC CIA to DIP adapter (untested)
protapp3.0 prototype DB25M/IDC26 DM25F/IDC26 external parallel port esd protection (sot-23-3 or sot-23-6 esd diodes)
6522/6526/8520 VIA/CIA diode board (top BAT54S VCC/GND clamping diodes, bottom SOT-23 double TVS diode on external IO)
two/four PLCC-32 29F040 to KS-ROM adapters: closed amibay thread These may have traces very close to pads, watch out for shorts
rev7A
rev9DL (left offset)
rev9DR (right offset)
double rev9D version 4xplcc to 2xdip-40/42:
0.1" grid distance of roms
0.2" grid distance if roms
68000 DIP-64 to DIP-64 with GND/VCC planes
68000 DIP-64 to ShrinkDIP-64 68HC000B(upside down)
CompactFlash to IDE (40pin) adapter. VCC on pin 20. Card on "bottom"
DIP-20 to SOJ-20/26 DRAM 256k x 4 adapter amibay
extra: pr77 relocator 9€, dip64 multifootprint 2€, lc4128 breakout 2€, atfblast 2€)
Note: Card edges are not beveled. This may not be greatest for the socket connector, also hot air surface leveling for cheapnes.
A600 1Meg chip ram expansion / clock (Sukkopera) OpenAmiga600RamExpansion_V (4)
tsop flash to KS-socket adapter Amiga Flash ROM Adapter V1 (40 Pin) (4)
tsop flash to KS-socket adapter Commodore AMIGA 500 600 2000 Kickstart 29F800 FLASH DIL TSOP (4)
Amiga to VGA adapter Commodore Amiga DB23 RGB VGA External Video Buffer (V6) Compatible with GBS-8200 8220 OSSC No Jail bars (4)
Amiga to VGA adapter AMIGA 15KHZ DISPLAY ADAPTER (Amiga VGA sync adapter) (4)
Amiga to Gotek GOTEK to AMIGA EXTERNAL CONNECTION ADAPTER (IDC CONNECTOR VERSION)
Amiga to external floppy Amiga External Floppy Adapter v1.3
HID2AMI HID2AMI v2.0.2 with Mousewheel Support and new unified firmware v3.0.x
Amiga Keyboard to USB HID (PC etc.) adapter board uses module Arduino Pro Micro Amiga 2000 / 3000 / 500 Keyboard USB adapter
Keyboard adapter board uses AT89C2051Do not be sad if your Amiga 500 keyboard is not working. AMIGA 500 PS/2 KEYBOARD ADAPTER will help you.
Small IDE to floppy led board Flash the floppy access light for internal IDE interface access on an AMIGA 500 .
IDE68K 425-i-dr14 amibay
IDE68K 426 (rare prototype of V429)
IDE68K 426-RI (rare, reverse connector)
IDE68K 427-m44pin2mm (rare)
IDE68K 428-RA (rare, right angle connector)
IDE68K 430-f44 (rare)
mem68k-v66 (rare) mem68k ram68k link
mem68k-v67
mem68k-v69p2 (10 pcs add +9€ and shipping)
PLCC Denise to DIP adapter amibay fs-thread
PLCC Paula to DIP adapter
PLCC CIA to DIP adapter (untested)
protapp3.0 prototype DB25M/IDC26 DM25F/IDC26 external parallel port esd protection (sot-23-3 or sot-23-6 esd diodes)
6522/6526/8520 VIA/CIA diode board (top BAT54S VCC/GND clamping diodes, bottom SOT-23 double TVS diode on external IO)
two/four PLCC-32 29F040 to KS-ROM adapters: closed amibay thread These may have traces very close to pads, watch out for shorts
rev7A
rev9DL (left offset)
rev9DR (right offset)
double rev9D version 4xplcc to 2xdip-40/42:
0.1" grid distance of roms
0.2" grid distance if roms
68000 DIP-64 to DIP-64 with GND/VCC planes
68000 DIP-64 to ShrinkDIP-64 68HC000B(upside down)
CompactFlash to IDE (40pin) adapter. VCC on pin 20. Card on "bottom"
DIP-20 to SOJ-20/26 DRAM 256k x 4 adapter amibay
extra: pr77 relocator 9€, dip64 multifootprint 2€, lc4128 breakout 2€, atfblast 2€)
Attachments
Last edited:
