Sold Amiga RGB2VGA Ultimate Line Remover Multi Filter User Switchable

[sampedenawa]

actually, yes!
Any chance for a (3d printed) case as well?
Thx. Oli

Uhm.. I could try to print one with my cheap 3d printer in black PLA, but can't guarantee the quality (it will not as good as the resin ones, for sure).
Building a resin batch would be cost-pointless for less than 20-30 units.

Will update here when I have built the units (as said, a couple or less for now).
You'll be the first in line when available of course.

 

[softinn]

I would probably hand-build a couple of them soon, but WITHOUT the DB23 connector, which I don't have available at the moment.

One should provide and (easy)solder the DB23 himself.

Would you be interested, in case ?

@sampedenawa
I could be interested, as I have a spare DB23 connector I recently bought just in case.
Anyway I don't have any decent soldering equipment (yet), which makes me think about it...

 

[sampedenawa]

@sampedenawa
I could be interested, as I have a spare DB23 connector I recently bought just in case.
Anyway I don't have any decent soldering equipment (yet), which makes me think about it...

Oh, well, the DB23 has large pads .. if you have *ANY* electronic soldering equipment, you should be able to solder it
Things are different if you only have those plumber solder equipments someone once asked me if they would work with pcb boards

 

[StompinSteve]

Declaring interest.

---

Declaring interest in one piece (when available). Thanks in advance.

---

(Interest withdrawn here)

 

[softinn]

Declaring interest.

---

@sampedenawa
you are right, this would push me to finally do something about it, since a lot of things to be repaired are piling up on my desk...
Anyway I'll declare my interest or I will lose my place in the queue.

---

(Marked as sold/completed by sampedenawa)

 

[sampedenawa]

Declaring interest.

---

Declaring interest in one piece (when available). Thanks in advance.

Declaring interest.

---

@sampedenawa
you are right, this would push me to finally do something about it, since a lot of things to be repaired are piling up on my desk...
Anyway I'll declare my interest or I will lose my place in the queue.

I am starting a production order for my other hid2ami boards these days, so I could add an order for these adapters as well.
So you will have machine-assembled units instead of my handbuilt ones (which is probably best , unless you purposely need original Italian craftmanship)


@StompinSteve : you are aware we are talking about the board complete BUT without the DB23 connector which should be added and soldered by yourself, are you ?

 

[StompinSteve]

Interest withdrawn. (was previously declared here)

---

you are aware we are talking about the board complete BUT without the DB23 connector which should be added and soldered by yourself, are you ?

Ehm no. In your original post you wrote "Ordered a small batch of fully assembled boards (original DB23 connector comprised)."

Comprised means "Consists of" or "made up of" which, in this context, means that it's included. I now see, in a later post, that you are out of DB23 connectors.

 

[sampedenawa]

Interest withdrawn. (was previously declared here)

---

Ehm no. In your original post you wrote "Ordered a small batch of fully assembled boards (original DB23 connector comprised)."

Comprised means "Consists of" or "made up of" which, in this context, means that it's included. I now see, in a later post, that you are out of DB23 connectors.

Correct ... I don't have connectors at the moment, and I am not going to source them in few time.
I was just arranging things for those two gentlemen above who asked

 

[Hirsch]

Declaring interest.

---

I'm interested in 2 boards without DB23 connectors if this is possible. (I'll organise and solder them myself.)

---

(Marked as sold/completed by sampedenawa)

 

[sampedenawa]

Declaring interest.

---

I'm interested in 2 boards without DB23 connectors if this is possible. (I'll organise and solder them myself.)

@softinn @C16Oli @Hirsch

Ok, will preorder components and start a small batch of these !
As usual, I will reserve you your requests and will send you soon an invitation to a private chat for instructions !

@C16Oli : will try to sync with the other hid2ami & cases order, so to combine shipping

 

[neuron55]

Declaring interest.

---

Declare interested in 2 pcs
Shipping to UK

---

(Marked as sold/completed by sampedenawa)

 

[sampedenawa]

Declaring interest.

---

Declare interested in 2 pcs

Got it.
Just to be sure you are aware: remember DB23 must be supplied & soldered by yourself
Will order 10 boards, so still 4 available only.

 

[Cefa68000]

Declaring interest.

---

I am interested for 1 unit if available to Sweden.

---

(Marked as sold/completed by sampedenawa)

 

[sampedenawa]

Declaring interest.

---

I am interested for 1 unit if available to Sweden.

Got it.
Will of course merge shipment with your hid2ami boards


3 available still !

 

[Moomin]

Declaring interest.

With shipping to Norway

---

(Marked as sold/completed by sampedenawa)

 

[sampedenawa]

Declaring interest.

With shipping to Norway

2 available still !

 

[sampedenawa]

New batch in production now, availability forecast is 3rd week of the current month.

One available still (be aware: NO DB23: you have to supply it yourself (a cut DB25 could be used also)

 

[softinn]

Package received, will leave positive feedback.

 

[sampedenawa]

Last one available still on sale !

 

[Hirsch]

Package received. Thank you very much.