Closed AT-Bus 2008 IDE controller + RAM board for Amiga 2000

  • Thread starter Thread starter sax
  • Start date Start date
  • Replies Replies 8
  • Views Views 260
Status
Not open for further replies.

sax

Well-known member
AmiBayer
Rating - 100%
68   0   0
Joined
Oct 28, 2011
Posts
1,437
Country
Hungary
Region
4400
For sale this great, indispensable full lenght IDE controller.
It constains 8 Mb fastRAM too with juperable option 2 - 4 - 6 - 8 Mb.

Tested in Amiga 2000 with 3,5" HDD and CD-ROM, requires some expertise, but working perfectly.
An essential entry-level card if you want to use IDE devices in your A2000.

Features:
IDE controller:
  • the board is basically the combination of the A.L.F. IDE controller and the MemoryMaster memory expansion cards
  • uses polled I/O, not DMA transfer
  • RDB compatible
  • 40 pin internal IDE header
  • place for a 3.5" hard disk on the card
  • delivered with A.L.F. 2 driver software
  • during transfers the high and low bytes are swapped as the A600/A1200/A4000 and PCs do so the drives formatted with them can be handled by the AT-Bus 2008
  • hard disk activity LED connector

    memory
    • sixteen ZIP sockets accept 8 MB RAM
    • supports either static column or page mode ZIPs
    • accepts ZIPs in groups of four giving 2, 4, 6 or 8 MB configurations
    • RAM and HD can be disabled separately by jumper
It comes without HDD and cables. I am looking for €120 plus shipping.
Payment via PayPal friends and family or +4% with PP buyer protect.
I preffered EU, but willing to ship worldwide except Ukraine and Russia.

01.webp


02.webp


Edit: Accepting offers!
 
Last edited:
Declaring interest.

I offer <Snip>€ plus shipping (To Portugal)
 
Last edited by a moderator:
I think you must send your offer by PM...

The poster will have been told that at the time his post was snipped.
 
Status
Not open for further replies.

Interest Queue

Interest Queue

Back
Top Bottom