Closed Atari 1040 STe 4Mb w/RTC, external SCSI CF reader + other stuff

Status
Not open for further replies.
Could you send some pics for the AtariST 1040? also would love to know shipping cost to spain (does it include audio/video leads & software?)

Thanks!
 
htdreams said:
Could you send some pics for the AtariST 1040? also would love to know shipping cost to spain (does it include audio/video leads & software?)

Thanks!
Click to expand...
Sure will do later!
Shipping to spain should cost around £27, but I'll give you a precise figure later.
It includes power cable and original ST manual+STe addendum and mouse.
You don't need any system software, as it's all in ROM.
 
I would be interested at the below 2 items :

2) GeSoft ACSI/SCSI interface cable. Tested working with the SCSI drivers ahdi and hddriver. £40 + shipping
9) 520Mb Quantum Fireball 540s, SCSI 50 internal hard disk, half height, £15+shipping

Depending on some answers :

1.What is the shipping cost to Greece Athens?
2.My STE has the bad DMA chip, will this work?
3.Do I have just to connect the Gesoft ACSI/SCSI interface cable with the hard disk by loading the appropriate drivers to work?

Thank you in advance for your attention.
 
kerkyra2007 said:
I would be interested at the below 2 items :

2) GeSoft ACSI/SCSI interface cable. Tested working with the SCSI drivers ahdi and hddriver. £40 + shipping
9) 520Mb Quantum Fireball 540s, SCSI 50 internal hard disk, half height, £15+shipping

Depending on some answers :

1.What is the shipping cost to Greece Athens?
2.My STE has the bad DMA chip, will this work?
3.Do I have just to connect the Gesoft ACSI/SCSI interface cable with the hard disk by loading the appropriate drivers to work?

Thank you in advance for your attention.
Click to expand...

Hi!
I'll let you know the cost of the shipping later. Regarding the other questions:

2. A lot of people reported no problems with the "bad" DMA chip, but there are people who have reported problems. A replacement chip should be relatively easy to acquire, though.

3. Yup. The interface cable simply connects to the Centronics-type port of the hard drive enclosure. Depending on your configuration, you might or might not need termination of the SCSI chain. Note I only sell the hard drive, not the enclosure!
Both hddriver and the ahdi drivers work.

Cheers,
Antonio
 
Thanks My friend.

As I do not have the enclosure and I have the BAD DMA for the moment I will let you continue with your sale. Do not bother with the shipping costs.

Thank you for your quick answer.

I hope all the best with your sale
 
Declaring interest in the 1040STe pending photos and shipping quote to the US.
 
Status
Not open for further replies.
Back
Top Bottom