Automatic Kickstart Switcher for Amiga 1000 [PERFECT WORKING]

[Ordyne]

Franck will you be doing the version for A1000 which allows you to use kippers ram/cf pcb? I know I asked some time ago but you were very busy.

Thanks
Craig

 

[Tuxbar81]

Franck will you be doing the version for A1000 which allows you to use kippers ram/cf pcb? I know I asked some time ago but you were very busy.

Thanks
Craig

Yes Craig. I'm sorry if I have forgotten to answer to your question. Don't hesitate to ask again if you receive no answer!
Take a look at the pictures of the first post. You'll see the new version of the switcher with a memory board installed onto my A1000. That works perfectly together!

- - - Updated - - -

Declaring interest in a NTSC unit.

I add a line in the table for you!

 

[Ordyne]

Franck will you be doing the version for A1000 which allows you to use kippers ram/cf pcb? I know I asked some time ago but you were very busy.

Thanks
Craig

Yes Craig. I'm sorry if I have forgotten to answer to your question. Don't hesitate to ask again if you receive no answer!
Take a look at the pictures of the first post. You'll see the new version of the switcher with a memory board installed onto my A1000. That works perfectly together!

No problem, I was busy also

Can you add me for one please, I think I had the NTSC layout of the original version and added the sockets to the mainboard to suit (its actually a pal mainboard) If that makes any sense to you!

 

[milo]

Interested in one Kickstart Switcher Pal Version, 68k Adapter and IDE RAM Board for me please.

 

[Tuxbar81]

Interested in one Kickstart Switcher Pal Version, 68k Adapter and IDE RAM Board for me please.

Hi Milo,

I make only the Kickstart Switcher. For the 68k Adapter and a IDE/Ram board, you'll have to find them somewhere else!
Are you always interested by the Switcher?!

 

[Hal]

interest withdrawn

 

[milo]

Yes i have interested in the Kickstart Switcher Pal Version. Sorry for the Late answer. I have see it now.

 

[Tuxbar81]

interest withdrawn

Yes, I've seen your thread of the kickrom adapter + boot selector. I had think that it's a kickstart switcher...

- - - Updated - - -

Yes i have interested in the Kickstart Switcher Pal Version. Sorry for the Late answer. I have see it now.

No problem milo, I add you to the table for a PAL version!

- - - Updated - - -

Second batch launched.

And always only 21€ for an AUTOMATIC ribbon switcher which allow you to use memory and accelerator expansions and which doesn't need any hole on the case of your A1000!
No soldering of wires needed since the signals are picked up with three mini-clips!

 

[cubelindo]

Great to see this moving forward!!

 

[Tuxbar81]

Yes, me too!

And the five switchers reserved by uunek are finished and have been tested!
PM follows quickly!



Four new ribbon version + one stand alone from the first batch.

 

[Tuxbar81]

PM sent to uunek with total amount for his switchers + shipping.

 

[uunek]

Payment sent.

 

[Polom]

Interested!
I'll take one, thanks ^^

 

[Tuxbar81]

Payment sent.

Payment received, thanks!

- - - Updated - - -

Interested!
I'll take one, thanks ^^

Ok, I add a line for you in the table.

 

[grobi1212]

Hi,

I´m Interested in this Switcher. Does it works with the A-500 also?

Please mark me, wish to order.
Sorry, must ask again, are there 2 Versions? Can anyone explain again? The Ribbon Version seems to be interesting for me. dont want any holes in my case.


Thx

grobi1212

 

[Tuxbar81]

Hi,

I´m Interested in this Switcher. Does it works with the A-500 also?

Please mark me, wish to order.
Sorry, must ask again, are there 2 Versions? Can anyone explain again? The Ribbon Version seems to be interesting for me. dont want any holes in my case.


Thx

grobi1212

Hi,

This thread is only for the Amiga 1000 Kickstart Switcher.

There is an another thread opened for a switcher which is for the A500, A600 & A2000.
The link is here: https://www.amibay.com/showthread.p...ew-project!&highlight=a500+kickstart+switcher

For the A500, you need the ribbon version. You don't need to make any hole on the case of your Amiga.
You can contact me if you have another questions.
Please, if you are interested, confirm me in the thread for the A500/2000 Kickstart switcher.

Best regards,
Franck

 

[grobi1212]

Hi Franck,

Thx for your reply and the link given to the right Thread. Thats what i thought of, i had read that ribbon stuff before and couldnt find that thread again and wondered of myself if i dreamed before? never seen thats this is for the 1000.

HAHA OK here we go THX again;-)

 

[auberon]

Hi!

Just found this thread.......looks like I can pimp my A1000 now, too! I already asked for an A500 version in the corresponding thread -- so please, add me to the A1000 list, too.

And this results in 1x A500 switcher & 1x A1000 switcher.

Thanks!

--a

 

[Tuxbar81]

Hi!

Just found this thread.......looks like I can pimp my A1000 now, too! I already asked for an A500 version in the corresponding thread -- so please, add me to the A1000 list, too.

And this results in 1x A500 switcher & 1x A1000 switcher.

Thanks!

--a

It's OK! I add you into the table. Which version of A1000 do you own? NTSC or PAL?

Best regards,
Franck.

 

[auberon]

Hi!

Just found this thread.......looks like I can pimp my A1000 now, too! I already asked for an A500 version in the corresponding thread -- so please, add me to the A1000 list, too.

And this results in 1x A500 switcher & 1x A1000 switcher.

Thanks!

--a

It's OK! I add you into the table. Which version of A1000 do you own? NTSC or PAL?

Best regards,
Franck.

Hi, I'd need the switcher for the PAL version of the A1000. Thanks!

--a