Closed CD32 (new caps), PSU, Controller, Game

  • Thread starter Thread starter jochen
  • Start date Start date
  • Replies Replies 3
  • Views Views 258
Status
Not open for further replies.

jochen

Active member
AmiBayer
Rating - 100%
81   0   0
Joined
Dec 19, 2011
Posts
1,050
Country
Germany
Region
Saxony
For sale is a CD32 with fresh new caps (THT instead of SMD or bad ceramic caps).
The CD32 is working perfect!
The CD cover holds not open allone, because the screw of the holding mechanism is removed because the case isn't closing perfect and so the CD is slipping anytime. Better so and working perfect!
The label is not in perfect condition, but is not glued anymore and you could easily order an reprint to use it there.

Generelly it's a niceCD32!

PSU is original and working perfect.
Gamepad is a modded version from SNES and working really smooth now on CD32! Auto permanent fire is available for the both fire buttons. The other selectors are useles and there are also no game what would need that on other bittons. ;)
Better game feeling then the original Pad!

You will get: CD32, PSU, Gamepad, Gamedisc (Diggers/Oscar)

Price is 330€ + P&P
 

Attachments

  • PXL_20211213_100136551.jpg
    PXL_20211213_100136551.jpg
    99.5 KB · Views: 2
  • PXL_20211213_100112031.jpg
    PXL_20211213_100112031.jpg
    99.3 KB · Views: 3
  • PXL_20211213_100050153.jpg
    PXL_20211213_100050153.jpg
    109.2 KB · Views: 3
  • PXL_20211213_100410895.jpg
    PXL_20211213_100410895.jpg
    108.6 KB · Views: 3
  • PXL_20211213_100126526.jpg
    PXL_20211213_100126526.jpg
    108.1 KB · Views: 2
  • PXL_20211213_100211341.jpg
    PXL_20211213_100211341.jpg
    112.3 KB · Views: 2
  • PXL_20211213_100302897.jpg
    PXL_20211213_100302897.jpg
    113.9 KB · Views: 3
Yuck, I have seen so many systems destroyed by through hole caps soldered to SMD pads. The vibrations during shipping is what typically does it
 
No, this is only the case if the one who has it soldered don't look at the pads! If the pads damaged they are not to use anymore for THT and so the caps must be connected to other stable points on the board.
Please don't make bad my good work and nobody ever has had a problem with the hundreds of my so repaired SMD Amigas! Also the PSU will say thanks if there no ceramic caps soldered, because the power on shock from ceramic ones kills an original PSU relatively fast (the CD32 has massive ammount of big caps!).
So far...
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom