CD32 riser with VGA and PS2 keyboard + 4 TF328
- Thread starter Arananet
- Start date
- Replies 53
- Views 18135
- Status
oobumblebeeoo
Member
Sorry to hijack, but I updated the wiki earlier for the people who have the first prototype PIC chips.
All issues are now fixed with the keyboard:
https://github.com/terriblefire/tf328/wiki/Other:-Edu-Arana-'Lite'-Keyboard-Troubleshooting
I hope this helps!
Ant
All issues are now fixed with the keyboard:
https://github.com/terriblefire/tf328/wiki/Other:-Edu-Arana-'Lite'-Keyboard-Troubleshooting
I hope this helps!
Ant
Last edited:
My reprogrammed pic arrived today with all the legs still on it. So let's just be sure here - I need to remove the leg shown in that link two posts up?
Also I am actually using an A4000 keyboard with my CD32 (connected on aux port), is there any way to have the pic in the card and it not affect resetting and booting if there is no ps/2 kb attached?
Also I am actually using an A4000 keyboard with my CD32 (connected on aux port), is there any way to have the pic in the card and it not affect resetting and booting if there is no ps/2 kb attached?
Last edited:
oobumblebeeoo
Member
The new pic does work, but on a keyboard reset (CTRL-WINDOWS-WINDOWS) you will get a hault and a red screen telling you your tf328 is bad...........
Snip pin 5 off and it's all good!
Ant
Last edited:
New way to order the riser vía my webpage, updated on the post. Speaking of the PIC issue, yes, pin 5 must bend up (no connect) this is due an incompatibility on some of the CD32's. Also, for those who I sold my riser, I send a new reprogrammed pic free in order to use the ps2 adapter included in my riser. Of course if you have a a4000 keyboard then there is no need of a ps2.
Chirpa651
Member
interested , still available?
Last edited:
- Status
Similar threads
- Locked
- Locked
