For Sale CDTV Accelerator -TF536 with 64MB FastRAM

[utri007]

Haven't started to build these because of a huge backlog on other cards offered here..
Will have vacation soon, so don't expect to get it soon...
There is also a second problem:
There might be fitting problems because of the tolerances made by Commodore! Please see instructions thread here:

https://www.a1k.org/forum/index.php?threads/91552/

It is a good idea to replace the CDTV's PSU with a smaller ATX PSU, especially if you want to use the Diag2Zorro expansion.

Commodore CDTV ATX Power Supply Unit Adaptor - Share Project - PCBWay

To connect a standard ATX PSU internally the CDTV.BOM list:R1 220 ohm 1/4W (0805 SMT)R2 2.2K ohm 1/4W (0805 SMT)R3 6.8 ohm 2W (2010 SMT)T1 BC846 (SOT23 SMT)MOLEX connectors:KK-156-2 (wire-to-board low...

www.pcbway.com

 

[C16Oli]

Declaring interest.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[Dgo]

Declaring interest. With rom please..

---

(Marked as sold/completed by 8 Bit Dreams)

 

[MaSch]

Declaring interest.

---

Declaring interest (for the latest one)…

---

(Marked as sold/completed by 8 Bit Dreams)

 

[C16Oli]

Declaring interest.

is there still one available?

 

[8 Bit Dreams]

Have started to build next batch,
There are enough ROMs and TF cards available

Sending payment notification to @jbrianc

 

[MaSch]

Have started to build next batch,
There are enough ROMs and TF cards available

I want to get the whole set includes TF incl. 68k socket shifter and ROMs. (CF-Card and IDE cable is not necessary).
Do you have such kit for me? Please send me a notification... PM is out. Thank you.

 

[DesktopDynamite]

Hello, not sure if this has been asked already, will the case lid close completely or need some modification?

TIA

 

[Timtheloon]

Hello, not sure if this has been asked already, will the case lid close completely or need some modification?

TIA

Mine fitted and allowed the lid to close without modification

 

[8 Bit Dreams]

Hello, not sure if this has been asked already, will the case lid close completely or need some modification?

TIA

Hello,
This card is built in a such way that You can close lid properly. (CPU is soldered directly on the PCB without socket, short pinheaders are used to solder shifter and card together, also angled pinheaders are used for IDE. Please check first post in this thread to see pictures of the final product

I want to get the whole set includes TF incl. 68k socket shifter and ROMs. (CF-Card and IDE cable is not necessary).
Do you have such kit for me? Please send me a notification... PM is out. Thank you.

Not sure what do You mean with "68k socket shifter" - please read first post in this thread carefully to see and understand which Hardware is offered here. There are no card & shifter - these are soldered together and will be delivered in one piece (hopefully)..

 

[MaSch]

Not sure what do You mean with "68k socket shifter" - please read first post in this thread carefully to see and understand which Hardware is offered here. There are no card & shifter - these are soldered together and will be delivered in one piece (hopefully)..

Of course, i know what you mean. The shifter or relocator is directly soldered to the TF board. This is exactly that, what i want, the complete kit incl. the ROMs.
And yes, hopefully it arrives safely in one pice…

 

[sandlbn]

Declaring interest.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[pampers]

Declaring interest.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[dawgtool]

Declaring interest.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[utri007]

Does it have buffered IDE? So that I could use long IDE cable?

 

[8 Bit Dreams]

Does it have buffered IDE? So that I could use long IDE cable?

Yes,
I've switched to revision 2b PCB and started to populate buffers

Payment notifications sent to following users:
@C16Oli - payment received, tracking updated via PM
@Dgo - payment received, payment received, tracking updated via PM
@MaSch - Payment received, payment received, tracking updated via PM
@sandlbn - payment received, tracking updated via PM
@pampers - payment received, tracking updated via PM

Sending out payment notification to @dawgtool

 

[8 Bit Dreams]

Declaring interest.

Payment received for 2x full sets,
Prepare shipment now

Also User @dawgtool has paid, prepare shipment now

 

[MaSch]

Package arrived today, installed and all runs fine incl. 3.2.2 ROM.
The top cover can be installed again, i‘m very happy.
Thank you @8_bit_dreams

 

[utri007]

Declaring interest. One without extended roms. I have 2.35 roms already.

---

(Marked as sold/completed by 8 Bit Dreams)

 

[C16Oli]

Items received. Thanks. Will test soon.