For Sale CDTV Accelerator -TF536 with 64MB FastRAM

[joora]

Package with the full set received. Thank you @8 Bit Dreams!

 

[cktwo]

Package received. Thank you!

 

[Barean]

New batch is running,
5 cards available!
Feel free to declare interest if card is needed!

Hi Folks,
have some CDTV accelerator sets for sale:
View attachment 2441091
containing of TF536+Riser+2.35 ROMs
View attachment 2441092 View attachment 2441093 View attachment 2441094

It's a standard TF536 with 64MB of FastRAM, but it's assembled in a special way to be used in our beloved Amiga CDTV
View attachment 2441095
This means: CPU is soldered directly on the PCB, IDE is 90° angled, and Relocator is soldered on,
So it is basically one card now, that can be plugged instread of 68000 CPU and off You go with accelerated CDTV!
View attachment 2441096
Asking 180€ + shipping for whole set with OS2.35 ROMS
Or 170€ +shipping for Accelerator without Extended ROMs

Important!
This Accelerator card does work on CDTV with Extended 2.35 ROMs + KS3.1 (and above) ONLY
it will fail on older KS /Extended ROMs!
According to Licence agreement You need to confirm that you are the owner of the 2.30 ROM extended roms
to get 2.35 update!

Now You might ask, what makes Extended 2.35 ROM so special?
Please take a read:

Introducing CDTV OS 2.35 – CDTV Land

cdtvland.com

View attachment 2441098View attachment 2441097
All parts of this Set are Open-Source, so feel free to build them,
You might see - a lot of work and effort was done to bring this to You!
Persons who are involved to make this happen:
Stephen Leary - TF536
Go0se - CDTV relocator
Mijo - OS2.35
Thank You guys!
​

FAQ:
Q: does lid closes properly when this card is installed
A: Yes, it is assembled in such way to fit with lid closed

Q: im interested in this accelerator, id like to know, is there any soldering work necessary?
A: no, this set offers You a Plug & Play solution

Q: is it possible to switch between 68000 and 030 CPU?
A: No, because You need to remove 68000 to be able to install this accelerator

Q: Will my CD-ROM drive work after i have installed this card?
A: Yes, it will be fully functional however OS2.35 Extended ROMs are necessary.

Q: Do i need to change 1.3KS ROM?
A: Yes, this card provides 64MB of FastRAM, KS1.3 can't autodetect it since it is in Zorrolll space, it has also scsi.device missing

Q: i don't like plastic CPU, would rather have ceramic, can i buy this card witout CPU?
A: No, because of thight fit there is no CPU socket on that card, CPU is soldered directly on accelerator

Q: can i send You my CPU to install it on this card?
A: Sure, i can build this card with Your CPU if You don't like plastic CPU for some reason

Q: my card is working but IDE seems to be very slow, why?
A:You need to set bigger Blocksize in Disk Partition utility if You have a CF card with 8GB or greater. It boots longer because Amiga reads whole disk table at boot, so go for 2048 or better 4096 blocks.
Although it is plastic CPU that is installed - it is a full CPU with MMU, so please install MMULibs and activate uFASTROM (as a part of it), this will copy Kickstart in FastRAM and give a great IDE boost.

Best regards,

- 8 Bit Dreams​

Edit:

Next three sets are ready to be shipped,
Sending out payment notifications to following users in line:
@wmsteele, @cktwo, @kruhl​

Hallo, ich würde gern ein Set kaufen.

VG

Barean

 

[8 Bit Dreams]

Darth Vader blessed some cards several hours ago

Please expect payment notification soon

 

[wmsteele]

Arrived in perfect condition, feedback done

 

[Epongette]

Hi ! Declaring interest in full set

 

[MrTomEk]

Declaring interest.

---

Hi ! one full set.

 

[nad_22]

Declaring interest.

---

Declaring interest in a full set with 2.35 ROMs .

 

[Mbuni]

Declaring interest in a full set

 

[dagonthedoom]

Declaring interest in a full set with 2.35 ROMs.

 

[MartinCummings]

Declaring interest.

---

Declaring interest in a full set, including 2.35 ROMs.
Thanks.

 

[Yodaphone]

Declaring interest.

---

I'm interested in two sets. I've sent my two ceramic 68030 CPUs. PM sent, thanks.

 

[Mariusz Jacob]

Declaring interest.

---

Hello,
I'm interested in purchasing the full card kit with the 2.35 ROM.

Will the card work with Kikstart 3.0?

Is it necessary to upgrade to 3.1?

 

[basco31]

Declaring interest.

---

Hi, I'm interested in the full card kit with the 2.35 ROM.