Sold CDTV RGB2HDMI by Hamag

[8 Bit Dreams]

Please do not declare interest - new batch is currently NOT PLANNED!

Hi,
Have some CDTV RGBtoHDMI units for sale


Designed by Hamag @A1k.org,

Asking 40€ + shipping for RGBtoHDMI+DENISE Adapter without Pi Zero
Or
99€ +shipping for full Set:
RGBtoHDMI + RasPi Zero + SD Card + DENISE Adapter
PICTURED DENISE IS NOT INCLUDED!​

Installation:
Take Your Raspberry Pi Zero and install it on the RGB board. prepare Your SD card now: latest SD Card content may be found on GitHub:

Releases · hoglet67/RGBtoHDMI

Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI - hoglet67/RGBtoHDMI

github.com

Just copy these Files on SD card and install it into Your Pi Zero.
Then:
1. Place Your DENISE Chip into Adapter, check notch on the Chip & attachment of the flat ribbon:

2. Feed flat ribbon on the side so that it makes a loop and connect it to the RGB board

3. Your RGBtoHDMI board comes with a preprogrammed CPLD (latest available firmware), so picture should come up if everything is installed properly, however, You will need to choose "Amiga" Profile - navigate with the buttons on RGBtoHDMI to choose:

place a cover on if everything is working as expected.

Additional info:
You can also solder both PCBs together, just remember that PCB material is quite fragile, you may rip it off easily if card be rejected incorrectly!

In case PCBs are soldered together - push the card with your finger from the next card slot (SCSI card Slot) pushing on RasPi connector:

.
Regards,

Dj

Edit: Payment notification sent to
@ZLT
@indigoprime
@Stefan-AT

payment received from user
@davidradke
Tracking updated via PM

 

[timmie]

Interested in 1, PM already sent.

 

[Xanxi]

Interested in 1 please.

 

[limboy777]

interested in 1 please

 

[manmax]

Interested in one

 

[timmie]

Awaiting for payment details from DjCook.

 

[manmax]

Pm sent too. Waiting for answer

 

[8 Bit Dreams]

Payment details sent to user @timmie,

Payment received from user @Xanxi
Shipped, Tracking updated via PM

@limboy777 - PM answered

@manmax - payment details sent via PM

 

[timmie]

Payment sent.

 

[Hal]

Interested in one

 

[fatbob_gb]

I am interested in one too. PM Sent

 

[Hannibal]

Interested in one. Sending PM

 

[timmie]

Items received, very well packed, looking awesome. May take some weeks before I can test.
Can't give feedback for another hour, since I just did so for a different thread.

Update: Feedback given.

 

[eXeler0]

interested in one if paypal is an option for payment

 

[8 Bit Dreams]

Hi,
PayPal payments are accepted, no problems on that. Will contact You as soon as next batch is ready to go. (Please expect next week).
Regards,

Dj

 

[Deleted member 9116]

Hello! Interested!

 

[8 Bit Dreams]

New batch is built, sending out PMs to
@Hal, @fatbob_gb, @Hannibal, @eXeler0 & @Nowee

 

[fatbob_gb]

Payment Sent

 

[Deleted member 9116]

Payment sent

 

[apolkosnik]

Declaring interest in one if still available. Will send PM shortly. Thanks!