Taken Clearout time!

  • Thread starter Thread starter Fizzy
  • Start date Start date
  • Replies Replies 66
  • Views Views 2064
Status
Not open for further replies.

Fizzy

Member
AmiBayer
Rating - 100%
42   0   0
Joined
Mar 28, 2009
Posts
187
Country
UK
Region
South Wales
**Final Update** Only roms below left. All other items have been taken or no longer available.

3.0 set for Amiga 4000 (version 39.106)
1.2 for A500 (315093-01)


-----------------

**Update** Items remaining listed below. All other items have been taken.

3.0 set for Amiga 4000 (version 39.106)
1.2 for A500 (315093-01)
2.05 for A600 (391304-01, V2-05 37-300) - Taken

Epson flatbed scanner - parallel port version, with amiga specific cable and software, I think under the "power scanner GT" name - (No longer available, seems to be dead now).
*quick update*
NEC 4 x 4 ide cdrom. Standard size quad (4) speed cd rom drive that actual holds 4 cd's - a mini slot loading jukebox! Have pc driver floppy as well. (taken locally, so no longer available)

IDE 5.25" caddy with removable tray for 3.5 inch drive. - (taken locally, so no longer available)



===== Original post for reference ===============
Hi All,

In the process of a major clearup/out and found the following, with probably more to follow. Free to anybody who covers p&p - otherwise they get taken to the recycling centre in the sky (or just over the hill in my case ;)).

5 Laptop/slimline atapi cd roms drives :-

1 is a toshiba XM-1702B (taken)
4 are Teac CD-224E's in various version. (all taken)

They are just the drives - you will need to obtain a suitable adapter for the back to convert to a standard ide connector.

Also selection of kickstart chips, were working fine when removed and have been stored in a plastic storage box. :-

3.0 set for Amiga 4000 (version 39.106)
1.3? for A500 (315093-02) - (Taken)
1.2 for A500 (315093-01)
2.05 for A600 (391304-01, V2-05 37-300)
3.0 set for A1200 - (taken)

Also Epson flatbed scanner - parallel port version, with amiga specific cable and software, I think under the "power scanner GT" name.

2 x 6GB toshiba 2.5 inch IDE drives. Model MK6015MAP. Formatted and tested in a pc. (both taken)

A500 User manual, in english and in reasonable condition. Also have the amigados 1.3 enhancer software manual too. (taken)

Got a fair few simms too - mainly 4MB, but some higher ones. Will test and post list later.

....more to follow soon!

Update - extra items :-

Also NEC 4 x 4 ide cdrom. Standard size quad (4) speed cd rom drive that actual holds 4 cd's - a mini slot loading jukebox! Have pc driver floppy as well.

IDE 5.25" caddy with removable tray for 3.5 inch drive.

Front 5.25 blanking plate from an A4000D, not yellowed (still beige?) and in good condition. (taken)

Anybody want any of this? :whistle:

Can supply pictures on request.

------------------------------------------

Requested/Taken so far :-

Juv UK - 2 Teac CR Roms, and 1 HDD.
bazzaq - A500 Manuals and 1.3 rom
fatbob_gb - 1 HDD.
blankstare - 1 Teac CD rom.

Hezor - Tosh and teac cd rom, IDE caddy (possibly)
Harrison - A4K blanking plate.
scrappysphinx - A1200 roms.
 
Last edited:
Hi.. im interested in

A500 User manual, in english and in reasonable condition. Also have the amigados 1.3 enhancer software manual too

will pm you.

edit: also the 1.3 rom.
 
i'll take the a1200 3.0 roms and one of the 6gb hdd's if there still is one
 
@Fizzy: do you still have the roms for the a600 and the a1200? If so...how much would be shipping to Buenos Aires, Argentina? Is that a600 rom capable of using hdd? Am i correct in thinking that from version 37250 up the A600 is ready for hdd?? Thanks!!!

Sebastian
 
@Sebastian: the 2.05 (auto-bootable ROM for A600) are the 37.300 & 37.350. Any ROM under 37.299 will not have the SCSI.device at all, so no PCMCIA nor IDE active when using they.

the .300 one is a bit problematic with CF cards and some HD models, and that's why the .350 is preferred over the older one.
 
@Sebastian: the 2.05 (auto-bootable ROM for A600) are the 37.300 & 37.350. Any ROM under 37.299 will not have the SCSI.device at all, so no PCMCIA nor IDE active when using they.

the .300 one is a bit problematic with CF cards and some HD models, and that's why the .350 is preferred over the older one.

@Rogerio: thanks a lot for all the good info you supply (as always!).
I was thinking in this rom because i intend to use a CF card in my soon-to-be with-me A600 coming from Sao Paulo :D

Guess i will have to look somewhere else...
Interest declined then

Good luck with your cleanout my friend! Hope all that stuff goes to good homes!!! :thumbsup:

Sebastian
 
Just as a side note to add misleading to the convolution: I use to use the .300 ROM with a lot of HD sizes and never had any issue at all.

I didn't tested with CF drives as HD, I'm selling the (miss)information as I bough it.
 
I would like the toshiba XM-1702B and the Teac CD-224E.

I would like a photo of the IDE 5.25" caddy with removable tray for 3.5 inch drive, i might be interested too.
 
I'm would like

Teac CD-224E
Front 5.25 blanking plate from an A4000D

Also if HeZoR doesn't want the IDE 5.25" caddy with removable tray for 3.5 inch drive, can I please have some pictures of it and a bit more info as I am interested in that too.

Finally, can you let me know what other sizes of ram you have?
 
I'd like any of the slim drives if anything's left, thx! (first post here in the bin, should I declare interest via PM too? thx!)
 
I'd like any of the slim drives if anything's left, thx! (first post here in the bin, should I declare interest via PM too? thx!)

Sorry, looks like they've all been taken. I'll keep an eye out during my clearout and see if any more turn up. :D

---------- Post added at 14:03 ---------- Previous post was at 14:02 ----------

I'm would like

Teac CD-224E
Front 5.25 blanking plate from an A4000D

Also if HeZoR doesn't want the IDE 5.25" caddy with removable tray for 3.5 inch drive, can I please have some pictures of it and a bit more info as I am interested in that too.

Finally, can you let me know what other sizes of ram you have?


I believe all the drives have been taken, but blanking plate is available.

I'll take some photos of the caddy and post it up for hezor and you.

---------- Post added at 15:39 ---------- Previous post was at 14:03 ----------

I'm would like

Teac CD-224E
Front 5.25 blanking plate from an A4000D

Also if HeZoR doesn't want the IDE 5.25" caddy with removable tray for 3.5 inch drive, can I please have some pictures of it and a bit more info as I am interested in that too.

Finally, can you let me know what other sizes of ram you have?

Ram - hmm, ok - I have quite a few, a lot of which aren't labelled. I've been going through some and found a couple of kingston 128mb simms. Double sided and the memory chips are low profile - but there are 4 chips (parity possibly?) on the bottom edge which aren't. Fitted and worked fine in simm slot of the blizzard scsi addon module though.

Got a couple of 32's, quite a lot of 16's and a few 8's. Is there a particular size/type you're on the lookout for? There are two chip, four chip, eight chip - some single sided, some double. Some is edo - as I say I have a fair few. I may have what you are after if you are looking for something specific.
 
Status
Not open for further replies.
Back
Top Bottom