For Sale Commodore VIC20/VC20 set with diskdrive, ramexpansion, printer, datasette, joystick, etc.

  • Thread starter Thread starter Overdoc
  • Start date Start date
  • Replies Replies 5
  • Views Views 751
O

Overdoc

Member
Rating - 100%
4   0   0
Joined
Jul 14, 2010
Posts
139
Country
Austria
Region
Vienna
I am selling a beautiful, complete VC20 (German name for VIC20) set, which consists of:

  • Commodore VC20 Computer
in nice working condition, with power supply, video/audio cable, and manual

  • Commodore VC1541 Floppy in white 1540 style case
the drive is fully VC20 compatible because it has an original 1540 rom 325303-01 chip inside, so it basically is a 1540 drive, but labeled as 1541
comes with a few disks with various VIC games

  • Commodore VC1515 Drucker
the first printer for the VC20 :) hard to find nowadays!
seems to work, but the ink ribbon needs to be renewed or swapped against a new one

  • Commodore C2N datasette
with original cassette 'Black Max'

  • Commodore VC1110 memory expansion 8K
8K memory expansion
with DIP switches it is possible to decide in which block of the VIC's address space the additional 8k ram should be available?
setting the 8k expansion to block 5 (A000-BFFF), it is possible to load VIC cartridge dumps into the expansion ram, and play from there :)

  • Commodore VC1311 joystick
looks just great together with the VC20 ;)
unfortunately not fully working (responds bad or not at all in some directions), so I have included another, fully working joystick



Everything (except the 1311 joystick) is tested and working.
If interested, I can send fotos or even a video of the system in action.
But I do not give any guarantee for the future, since the hardware is about 40 years old!

I sell everything together for 300,- Euro

Disclaimer: This is a private person's sale, therefore no warranty, no refund, no return.

Edit: The thread has now been updated with a new foto including a proof of ownership paper.
 

Attachments

  • VC20 Set 1_2.jpg
    VC20 Set 1_2.jpg
    196.4 KB · Views: 47
  • VC20 Set 2.jpg
    VC20 Set 2.jpg
    149.5 KB · Views: 35
  • VC20 Set 3.jpg
    VC20 Set 3.jpg
    122.7 KB · Views: 34
  • VC20 Set 4.jpg
    VC20 Set 4.jpg
    158.7 KB · Views: 30
  • VC20 Set 5.jpg
    VC20 Set 5.jpg
    189.8 KB · Views: 29
  • VC20 Set 6.jpg
    VC20 Set 6.jpg
    175.1 KB · Views: 32
  • VC20 Set 7.jpg
    VC20 Set 7.jpg
    124.6 KB · Views: 29
  • VC20 Set 8.jpg
    VC20 Set 8.jpg
    138.7 KB · Views: 27
  • VC20 Set 9.jpg
    VC20 Set 9.jpg
    125.8 KB · Views: 34
Last edited:
@Overdoc as per the rules, please provide proof of ownership. Failure to do so will result in your thread being closed.
www.amibay.com

Terms and rules

You must agree to these terms and rules before using the site.
www.amibay.com www.amibay.com
 
Ok, sorry, please give me 2 days and I will do another foto of it together with a paper with my Aminet name and date, if this is ok?
I thought this was not required any longer when you have 100% feedback....?!
 
Overdoc said:
Ok, sorry, please give me 2 days and I will do another foto of it together with a paper with my Aminet name and date, if this is ok?
I thought this was not required any longer when you have 100% feedback....?!
Click to expand...
The rules are, you must provide proof of ownership if you have a post count of less than 50 and a feedback count of less than ten.

Both requirements must be met.

2 days is not acceptable I am afraid. The thread will be locked for the time being. Please message either myself or one of the other mods when you are ready to add the proof.
 
Ok, but then there is either a error in the rules, or you are wrong, because here in the temrs and rules:
www.amibay.com

Terms and rules

You must agree to these terms and rules before using the site.
www.amibay.com www.amibay.com
it is written that a post count of less than 50 OR less than 10 feedback points requires a proof of ownership.
Since I have 133 posts, it should be ok?
 
You must log in or register to reply here.
Back
Top Bottom