Locutus
New member
With some pain i've decided to get out of the Amiga.
This is my A4000 which i've used the last 5 years for development and testing.
It's always ran brilliantly and i've never had any problems with it running hour long local builds.
So, what's included in this complete system:
Amiga 4000:
- 4MB FastRAM on the mainboard, 2MB Chip
- Kickstart 3.1 ROM's
- Buster 11
- no leaking battery
- IDE to Compact Flash adapter in IDE socket, 4GB CF card (will be wiped)
- Front bezel is obviously yellowed.
- missing 5.25" bay cover, 3.5" floppy drive alas doesn't work.
Cyberstorm 060 MK1:
- 50MHz full 68060
- Heatsink fitted
- 36MB FastRAM.
- Factory original 060 configuration, includes boot ROM so it works with stock 3.x ROM's.
Configuring FastRAM is finnicky for this board, if 128MB FastRAM is desired and you don't want to do this yourself i can buy the SIMM's at your cost and configure it before shipping out the machine.
Cybervision64:
- 4MB RAM fitted
- Pass through cable included.
IndivisionAGA Mk2
- VGA/HDMI Output.
- Currently configured going through the CV64's switcher.
XSurf 10:
- Backplate is missing, but card works fine.
- Has been used with Ethernet, Clockports and IDE ports, all work.
VarIO:
- Serial and Parallel board, used it as a debugger output.
- Sports clockport socket.
- Includes extra DB25/9 backplates.
RapidRoad USB for Clockport:
- USB Controller works great, been mostly used with HID and the occasional USB stick.
- This version also works when plugged into a XSurf100.
- Currently attached to the VarIO clockport
Here's a demonstration video of it running the demo Jesus Christ Motocross:
(Sorry for the atrocious sound, crappy monitor speakers and then horrible camera microphone)
Pictures of the running machine: https://imgur.com/a/UvMQGMX
And pictures of the internals: https://imgur.com/a/lmPTqfe
As I'm still using the machine i haven't disassembled it yet to take pictures of all individual components, can be done on request.
Price: For the whole setup i want 2100€
Shipping:
Machine will be sent from Finland and I'd prefer to only ship to Europe, keep in mind the current situation in regards to shipment times please.
Shipping cost as a single package would be about 60€, with the machine disassembled and components multiple boxed.
I have experience with shipping larger fragile systems, last year i sent a Atari TT030 to a happy customer here
Payment:
Bank transfer preferred, but Paypal payment as 'Friend' is acceptable if you cover fees.
This is my A4000 which i've used the last 5 years for development and testing.
It's always ran brilliantly and i've never had any problems with it running hour long local builds.
So, what's included in this complete system:
Amiga 4000:
- 4MB FastRAM on the mainboard, 2MB Chip
- Kickstart 3.1 ROM's
- Buster 11
- no leaking battery
- IDE to Compact Flash adapter in IDE socket, 4GB CF card (will be wiped)
- Front bezel is obviously yellowed.
- missing 5.25" bay cover, 3.5" floppy drive alas doesn't work.
Cyberstorm 060 MK1:
- 50MHz full 68060
- Heatsink fitted
- 36MB FastRAM.
- Factory original 060 configuration, includes boot ROM so it works with stock 3.x ROM's.
Configuring FastRAM is finnicky for this board, if 128MB FastRAM is desired and you don't want to do this yourself i can buy the SIMM's at your cost and configure it before shipping out the machine.
Cybervision64:
- 4MB RAM fitted
- Pass through cable included.
IndivisionAGA Mk2
- VGA/HDMI Output.
- Currently configured going through the CV64's switcher.
XSurf 10:
- Backplate is missing, but card works fine.
- Has been used with Ethernet, Clockports and IDE ports, all work.
VarIO:
- Serial and Parallel board, used it as a debugger output.
- Sports clockport socket.
- Includes extra DB25/9 backplates.
RapidRoad USB for Clockport:
- USB Controller works great, been mostly used with HID and the occasional USB stick.
- This version also works when plugged into a XSurf100.
- Currently attached to the VarIO clockport
Here's a demonstration video of it running the demo Jesus Christ Motocross:
(Sorry for the atrocious sound, crappy monitor speakers and then horrible camera microphone)
Pictures of the running machine: https://imgur.com/a/UvMQGMX
And pictures of the internals: https://imgur.com/a/lmPTqfe
As I'm still using the machine i haven't disassembled it yet to take pictures of all individual components, can be done on request.
Price: For the whole setup i want 2100€
Shipping:
Machine will be sent from Finland and I'd prefer to only ship to Europe, keep in mind the current situation in regards to shipment times please.
Shipping cost as a single package would be about 60€, with the machine disassembled and components multiple boxed.
I have experience with shipping larger fragile systems, last year i sent a Atari TT030 to a happy customer here
Payment:
Bank transfer preferred, but Paypal payment as 'Friend' is acceptable if you cover fees.
Last edited by a moderator:
